NewsCNCnetPDMAbout usSupport
  

CNC_DTSVRDSET | DATA

Description

Reads the setting data in the DATA SERVER.

If this function is executed while cnc_dtsvftpput or cnc_dtsvftpget is executing(until the completion status is got by cnc_dtsvftpstat), EW_BUSY is returned.
MTConnect Fanuc Adapter

Universal Fanuc Driver

Fanuc Focas Library CD

Declaration

#include "fwlib32.h"

FWLIBAPI short WINAPI cnc_dtsvrdset(unsigned short FlibHndl,IODBDSSET *set);

Arguments : HSSB

FlibHndl   [ in ]

Specify the library handle. See "Library handle" for details.

set   [ out ]
Pointer to the IODBDSSET structure including the setting data in the DATA SERVER.

The IODBDSSET structure is as follows.

typedef struct iodbdsset {
        char host_ip[16] ;
        char host_uname[32] ;
        char host_passwd[32] ;
        char host_dir[128] ;
        char dtsv_mac[13] ;
        char dtsv_ip[16] ;
        char dtsv_mask[16] ;
} IODBDSSET ;
host_ip[16]
Current IP address of host computer is stored by ASCII code(max. 16 characters including 'NULL').
host_uname[32]
Current user name of host computer, which is used to login by means of 'FTP', is stored by ASCII code(max. 32 characters including 'NULL').
host_passwd[32]
(not used)
host_dir[128]
Current directory of host computer, which is accessed by DATA SERVER, is stored by ASCII code(max. 128 characters including 'NULL').
dtsv_mac[13]
Current MAC address of DATA SERVER board is stored by ASCII code(max. 13 characters including 'NULL').
dtsv_ip[16]
Current IP address of DATA SERVER board is stored by ASCII code (max. 16 characters including 'NULL').
dtsv_mask[16]
Mask address of current IP address of network is stored by ASCII code(max. 16 characters including 'NULL').

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

Return code Meaning/Error handling
EW_BUSY
(-1)
Busy
Try again because DATA SERVER is processing.
(There is a possibility of forgetting to call cnc_dtsvftpstat function.)
EW_FUNC
(1)
Unavailable
- This function is not available for the DATA SERVER board (10BASE-T).
EW_NOOPT
(6)
No option
- The extended driver/library function is necessary.
- The DATA SERVER board(hardware) is necessary.
EW_DTSRVR
(14)
DATA SERVER error
In order to get more information for this err_no return value, execute cnc_getdtailerr function. The following details status will be set onto the member, err_no of ODBERR structure.
1 <--> 498:DATA SERVER error
499: DATA SERVER system error

As for the other return codes or the details, see "Return status of Data window function"

CNC option

For HSSB connection,

    The extended driver/library function is necessary.

CNC parameter

This function is not related to CNC parameter.

CNC mode

This function can be used in any CNC mode.

Available CNC

0i-A 0i-B/C(Note) 0i-D 0i-F 15 15i 16 18 21 16i-A 18i-A 21i-A 16i-B 18i-B 21i-B 30i-A 30i-B
M (Machining)X X X X H X H H X H H H H H H X X
T (Turning) X X X X H - H H X H H H H H H X X
LC (Loader) - - - - - - X X X X X X X X X - -

0i-D0i-F16i18i30i-A30i-B
P (Punch press)X X X X - X
L (Laser) - - X - - X
W (Wire) - - X X X X


Power Mate i-DX
Power Mate i-HX
Power Motion i-AX

"O" : Both Ethernet and HSSB
"E" : Ethernet
"H" : HSSB
"X" : Cannot be used
"-" : None

Note) 0i-C does not support the HSSB function.

See Also

cnc_dtsvwrset  

Privacy notice

This website uses cookies. By continuing to use it you agree to our privacy policy. 

https://www.inventcom.net/fanuc-focas-library/data/cnc_dtsvrdset

Fanuc Focas Library | Data | cnc_clrmsgbuff

Clears the receive buffer or the transmit buffer.... [read more]
Fanuc Focas Library | Data | cnc_clrmsgbuff

Fanuc Focas Library | Data | cnc_dschdir

DATA SERVER Changing a current folder of the ATA card with DATA SERVER function. DATA SERVER Host... [read more]
Fanuc Focas Library | Data | cnc_dschdir

Fanuc Focas Library | Data | cnc_dscopyfile

Copying a file in the ATA card with DATA SERVER function.... [read more]
Fanuc Focas Library | Data | cnc_dscopyfile

Fanuc Focas Library | Data | cnc_dsftpcancel

This function is used to cancel the following operetions.... [read more]
Fanuc Focas Library | Data | cnc_dsftpcancel

Fanuc Focas Library | Data | cnc_dsftpstat

The execution result(EW_OK/EW_DTSRVR) of the following function can be taken out only at once.... [read more]
Fanuc Focas Library | Data | cnc_dsftpstat

Fanuc Focas Library | Data | cnc_dsget_req

Directs to GET a file to from a host computer at DATA SERVER. When this function is normally ended, it starts getting files from host... [read more]
Fanuc Focas Library | Data | cnc_dsget_req

Fanuc Focas Library | Data | cnc_dslistdel_req

According to the list which exists in the ATA card of DATA SERVER functon, two or more files are deleted. When this function carries... [read more]
Fanuc Focas Library | Data | cnc_dslistdel_req

Fanuc Focas Library | Data | cnc_dslistget_req

According to the list file which exists in the connection host of DATA SERVER function, the file transfer of two or more files is continuously carried... [read more]
Fanuc Focas Library | Data | cnc_dslistget_req

Fanuc Focas Library | Data | cnc_dslistput_req

According to the list file which exists in the ATA card of DATA SERVER function ,the file transfer of two or more files is carried out to a connection... [read more]
Fanuc Focas Library | Data | cnc_dslistput_req

Fanuc Focas Library | Data | cnc_dsmget_req

It directs to MGET a file from a host computer to DATA SERVER. A wild card can be used for a file name and the file transfer of two or... [read more]
Fanuc Focas Library | Data | cnc_dsmget_req

Fanuc Focas Library | Data | cnc_dsmkdir

DATA SERVER A new folder is created to the current folder of the ATA card of DATA SERVER function. DATA SERVER... [read more]
Fanuc Focas Library | Data | cnc_dsmkdir

Fanuc Focas Library | Data | cnc_dsmput_req

It directs to MPUT a file to a host computer from DATA SERVER. A wild card can be used for a file name and the file transfer of two or... [read more]
Fanuc Focas Library | Data | cnc_dsmput_req

Fanuc Focas Library | Data | cnc_dsput_req

Directs to PUT a file to a host computer to DATA SERVER. When this function is normally ended, it starts putting files from host... [read more]
Fanuc Focas Library | Data | cnc_dsput_req

Fanuc Focas Library | Data | cnc_dsremove

DATA SERVER The file in the current folder of the ATA card of DATA SERVER function delete. DATA SERVER Host... [read more]
Fanuc Focas Library | Data | cnc_dsremove

Fanuc Focas Library | Data | cnc_dsrename

DATA SERVER Changing the file or folder name which exist in the current folder of the ATA card of DATA SERVER... [read more]
Fanuc Focas Library | Data | cnc_dsrename

Fanuc Focas Library | Data | cnc_dsrmdir

DATA SERVER The folder in the current folder of the ATA card of DATA SERVER function delete. DATA SERVER... [read more]
Fanuc Focas Library | Data | cnc_dsrmdir

Fanuc Focas Library | Data | cnc_dtsvchkdsk

Checks the hard disk on the DATA SERVER whether there is an error sector etc. or not. If this function is executed while... [read more]
Fanuc Focas Library | Data | cnc_dtsvchkdsk

Fanuc Focas Library | Data | cnc_dtsvcnclupdn

Cancels the following if it is being executed. - Download from DATA SERVER to CNC - Upload from CNC to... [read more]
Fanuc Focas Library | Data | cnc_dtsvcnclupdn

Fanuc Focas Library | Data | cnc_dtsvdelete

Deletes the file in the DATA SERVER. If this function is executed while... [read more]
Fanuc Focas Library | Data | cnc_dtsvdelete

Fanuc Focas Library | Data | cnc_dtsvdownload

Orders the CNC to download the file from the DATA SERVER. Therefore, normal termination of this function shows that downloading the file from the DATA SERVER... [read more]
Fanuc Focas Library | Data | cnc_dtsvdownload

Fanuc Focas Library | Data | cnc_dtsvftpget

Orders the DATA SERVER to get file from the host computer. Therefore, normal termination of this function shows that getting the file from the host computer... [read more]
Fanuc Focas Library | Data | cnc_dtsvftpget

Fanuc Focas Library | Data | cnc_dtsvftpput

Orders the DATA SERVER to put file to the host computer. Therefore, normal termination of this function shows that putting the file to the host computer has... [read more]
Fanuc Focas Library | Data | cnc_dtsvftpput

Fanuc Focas Library | Data | cnc_dtsvftpstat

The execution result of cnc_dtsvftpput ,... [read more]
Fanuc Focas Library | Data | cnc_dtsvftpstat

Fanuc Focas Library | Data | cnc_dtsvgetdncpg

Gets the file name for DNC operation in the DATA SERVER.... [read more]
Fanuc Focas Library | Data | cnc_dtsvgetdncpg

Fanuc Focas Library | Data | cnc_dtsvgetmode

Gets the current mode of the DATA SERVER(storage mode/buffer mode).... [read more]
Fanuc Focas Library | Data | cnc_dtsvgetmode

Fanuc Focas Library | Data | cnc_dtsvhdformat

Formats the hard disk on the DATA SERVER. If this function is executed while... [read more]
Fanuc Focas Library | Data | cnc_dtsvhdformat

Fanuc Focas Library | Data | cnc_dtsvmntinfo

Reads the following maintenance information for the DATA SERVER. This is the function for purposes of maintenance.... [read more]
Fanuc Focas Library | Data | cnc_dtsvmntinfo

Fanuc Focas Library | Data | cnc_dtsvrdcram

Reads the contents of the interface buffer for the DATA SERVER. This is the function for purposes of maintenance.... [read more]
Fanuc Focas Library | Data | cnc_dtsvrdcram

Fanuc Focas Library | Data | cnc_dtsvrderrmsg

Reads the message of the error occurred in the DATA SERVER.... [read more]
Fanuc Focas Library | Data | cnc_dtsvrderrmsg

Fanuc Focas Library | Data | cnc_dtsvrdfile

Transfers file from DATA SERVER to hard disk on personal computer. This function is effective for the DATA SERVER board(10BASE-T), and... [read more]
Fanuc Focas Library | Data | cnc_dtsvrdfile

Fanuc Focas Library | Data | cnc_dtsvrdpgdir

Reads the directory information in the DATA SERVER. If this function is executed while... [read more]
Fanuc Focas Library | Data | cnc_dtsvrdpgdir

Fanuc Focas Library | Data | cnc_dtsvsavecram

Saves the contents of the interface buffer for the DATA SERVER to the file by the name of COMMON.RAM in the hard disk of the DATA SERVER.... [read more]
Fanuc Focas Library | Data | cnc_dtsvsavecram

Fanuc Focas Library | Data | cnc_dtsvsetdncpg

Sets the file name for DNC operation in the DATA SERVER.... [read more]
Fanuc Focas Library | Data | cnc_dtsvsetdncpg

Fanuc Focas Library | Data | cnc_dtsvsetmode

Sets the current mode of the DATA SERVER(storage mode/buffer mode). If the mode of the DATA SERVER is changed, all the data in hard disk of the DATA... [read more]
Fanuc Focas Library | Data | cnc_dtsvsetmode

Fanuc Focas Library | Data | cnc_dtsvupdnstat

The execution result of cnc_dtsvdownload ,... [read more]
Fanuc Focas Library | Data | cnc_dtsvupdnstat

Fanuc Focas Library | Data | cnc_dtsvupload

Orders the CNC to upload the file to the DATA SERVER. Therefore, normal termination of this function shows that uploading the file to the DATA SERVER has been... [read more]
Fanuc Focas Library | Data | cnc_dtsvupload

Fanuc Focas Library | Data | cnc_dtsvwrfile

Transfers file from hard disk on personal computer to DATA SERVER. This function is effective for the DATA SERVER board(10BASE-T), and 16i/18i/21i, 0i.... [read more]
Fanuc Focas Library | Data | cnc_dtsvwrfile

Fanuc Focas Library | Data | cnc_dtsvwrset

Writes the setting data in the DATA SERVER. If this function is executed while... [read more]
Fanuc Focas Library | Data | cnc_dtsvwrset

Fanuc Focas Library | Data | cnc_rdcomlogmsg

Reads logging message for DNC2.... [read more]
Fanuc Focas Library | Data | cnc_rdcomlogmsg

Fanuc Focas Library | Data | cnc_rdcomopemsg

Reads operator's message for DNC1,DNC2.... [read more]
Fanuc Focas Library | Data | cnc_rdcomopemsg

Fanuc Focas Library | Data | cnc_rdcomparam

Reads communication parameters for DNC1, DNC2 or OSI-Ethernet function.... [read more]
Fanuc Focas Library | Data | cnc_rdcomparam

Fanuc Focas Library | Data | cnc_rddncfname

Reads the name of the file in the host computer for DNC operation using DNC1, DNC2 or OSI-Ethernet function.... [read more]
Fanuc Focas Library | Data | cnc_rddncfname

Fanuc Focas Library | Data | cnc_rddsdevinfo

All the number of pages , the use number of pages, the total number of entries, and the numberof use entries are taken out from an ATA... [read more]
Fanuc Focas Library | Data | cnc_rddsdevinfo

Fanuc Focas Library | Data | cnc_rddsdir

DATA SERVER The current folder name of the ATA card of DATA SERVER function is taken out with a full path.... [read more]
Fanuc Focas Library | Data | cnc_rddsdir

Fanuc Focas Library | Data | cnc_rddsdncfile

DATA SERVER The file name set to DNC operation at the time of the Storage mode of DATA SERVER function is taken out with... [read more]
Fanuc Focas Library | Data | cnc_rddsdncfile

Fanuc Focas Library | Data | cnc_rddsfile

DATA SERVER The list of the files in the current folder of DATA SERVER function (a sub folder is included) is taken out.... [read more]
Fanuc Focas Library | Data | cnc_rddsfile

Fanuc Focas Library | Data | cnc_rdrcvmsg

Reads contents of the receive buffer in which received message is stored. When this function is called, receipt status in CNC is... [read more]
Fanuc Focas Library | Data | cnc_rdrcvmsg

Fanuc Focas Library | Data | cnc_rdrcvstat

Obtains receipt status of message for OSI-Ethernet. The receipt status becomes ON when CNC receives a message for OSI-Ethernet, and becomes OFF when... [read more]
Fanuc Focas Library | Data | cnc_rdrcvstat

Fanuc Focas Library | Data | cnc_rdsndmsg

Reads contents of the transmit buffer in which transmitted message is stored.... [read more]
Fanuc Focas Library | Data | cnc_rdsndmsg

Fanuc Focas Library | Data | cnc_sendmessage

Sends message to the host computer.... [read more]
Fanuc Focas Library | Data | cnc_sendmessage

Fanuc Focas Library | Data | cnc_wrcomparam

Writes communication parameters for DNC1,DNC2 or OSI-Ethernet function. When communication parameters are written to OSI-Ethernet board... [read more]
Fanuc Focas Library | Data | cnc_wrcomparam

Fanuc Focas Library | Data | cnc_wrdncfname

Writes the name of the file in the host computer for DNC operation using DNC1, DNC2 or OSI-Ethernet function.... [read more]
Fanuc Focas Library | Data | cnc_wrdncfname

Fanuc Focas Library | Data | cnc_wrdsdncfile

DATA SERVER The file for DNC operation at the time of the storage mode of DATA SERVER function is set up. DATA... [read more]
Fanuc Focas Library | Data | cnc_wrdsdncfile

Fanuc Focas Library | Data | ds_cancel

The execution of the function for the following DATA SERVER is stopped.... [read more]
Fanuc Focas Library | Data | ds_cancel

Fanuc Focas Library | Data | ds_checkhdd

Whether a defective sector exists in the hard disk is checked.... [read more]
Fanuc Focas Library | Data | ds_checkhdd

Fanuc Focas Library | Data | ds_chghdddir

Change the work directory(current directory) of hard disk in the DATA SERVER. This function is available even to Fast Ethernet.... [read more]
Fanuc Focas Library | Data | ds_chghdddir

Fanuc Focas Library | Data | ds_copyhddfile

The file in the hard disk of the DATA SERVER is copied. In this function, the control returns to the application without only requesting the copy of the file... [read more]
Fanuc Focas Library | Data | ds_copyhddfile

Fanuc Focas Library | Data | ds_delhdddir

Delete the directory in the hard disk of the DATA SERVER.... [read more]
Fanuc Focas Library | Data | ds_delhdddir

Fanuc Focas Library | Data | ds_delhddfile

The file in the hard drive of the DATA SERVER is deleted. The some files can be deleted simultaneously by specifying wild-card(*,?). In this function,... [read more]
Fanuc Focas Library | Data | ds_delhddfile

Fanuc Focas Library | Data | ds_delhostfile

Delete the file of host computer. The wild-card(*, ?) cannot be used to specify the name.... [read more]
Fanuc Focas Library | Data | ds_delhostfile

Fanuc Focas Library | Data | ds_download

Outputs data to be registered(downloading). This function is only for Fast Ethernet board. This function is not supported at Embedded... [read more]
Fanuc Focas Library | Data | ds_download

Fanuc Focas Library | Data | ds_dwnend

Notifies the end of downloading data to CNC. (This function must be executed after... [read more]
Fanuc Focas Library | Data | ds_dwnend

Fanuc Focas Library | Data | ds_dwnstart

Requests CNC to start downloading. (This function must be executed before... [read more]
Fanuc Focas Library | Data | ds_dwnstart

Fanuc Focas Library | Data | ds_formathdd

The hard disk is formatted(initialization).... [read more]
Fanuc Focas Library | Data | ds_formathdd

Fanuc Focas Library | Data | ds_gethostfile

The file of the host computer is transferred to the hard disk of the DATA SERVER according to the get command of the FTP.... [read more]
Fanuc Focas Library | Data | ds_gethostfile

Fanuc Focas Library | Data | ds_ldelhddfile

The files in the hard disk of the DATA SERVER are deleted according to the list file. The wild-card(*, ?)... [read more]
Fanuc Focas Library | Data | ds_ldelhddfile

Fanuc Focas Library | Data | ds_lgethostfile

The files in the host computer are transferred to the hard disk of the DATA SERVER by the processing of FTP according to the... [read more]
Fanuc Focas Library | Data | ds_lgethostfile

Fanuc Focas Library | Data | ds_lputhddfile

The files in the hard disk of the DATA SERVER are transferred to the host computer by the processing of FTP according to the... [read more]
Fanuc Focas Library | Data | ds_lputhddfile

Fanuc Focas Library | Data | ds_makehdddir

Make the directory in the hard disk of the DATA SERVER.... [read more]
Fanuc Focas Library | Data | ds_makehdddir

Fanuc Focas Library | Data | ds_mgethostfile

The files of the host computer are transferred to the hard disk of the DATA SERVER according to the mget command of the... [read more]
Fanuc Focas Library | Data | ds_mgethostfile

Fanuc Focas Library | Data | ds_mputhddfile

The files in the hard disk of the DATA SERVER are transferred to the host computer according to the mput command of the... [read more]
Fanuc Focas Library | Data | ds_mputhddfile

Fanuc Focas Library | Data | ds_puthddfile

The file in the hard disk of the DATA SERVER is transferred to the host computer side according to the put command of the FTP. The wild-card(*, ?) cannot... [read more]
Fanuc Focas Library | Data | ds_puthddfile

Fanuc Focas Library | Data | ds_rddnchddfile

The file name which includes the PATH name in the hard disk which is setted for the DNC operation are acquired.... [read more]
Fanuc Focas Library | Data | ds_rddnchddfile

Fanuc Focas Library | Data | ds_rddnchostfile

The connected host number and the file name in host computer for the DNC operation is acquired.... [read more]
Fanuc Focas Library | Data | ds_rddnchostfile

Fanuc Focas Library | Data | ds_rdfile

Transfers file from DATA SERVER to hard disk on personal computer. This function is effective in only 16i/18i/21i. and, this function... [read more]
Fanuc Focas Library | Data | ds_rdfile

Fanuc Focas Library | Data | ds_rdhdddir

Get the file information at each file. The following information is acquired at each file. - File name... [read more]
Fanuc Focas Library | Data | ds_rdhdddir

Fanuc Focas Library | Data | ds_rdhddinfo

Get the information of hard disk of DATA SERVER. The following information can be acquired. - The remainder capacity of hard disk.... [read more]
Fanuc Focas Library | Data | ds_rdhddinfo

Fanuc Focas Library | Data | ds_rdhostdir

Get the file information of host computer.... [read more]
Fanuc Focas Library | Data | ds_rdhostdir

Fanuc Focas Library | Data | ds_rdhostdir2

Get the number of files and file information of login directory on the host computer. Information acquired in... [read more]
Fanuc Focas Library | Data | ds_rdhostdir2

Fanuc Focas Library | Data | ds_rdhostinfo

Get the information of login directory of the host computer. The following information is acquired.... [read more]
Fanuc Focas Library | Data | ds_rdhostinfo

Fanuc Focas Library | Data | ds_rdhostno

Get the host number of the connected host computer.... [read more]
Fanuc Focas Library | Data | ds_rdhostno

Fanuc Focas Library | Data | ds_rdm198hdddir

The work directory for the M198(subprogram call) is acquired.... [read more]
Fanuc Focas Library | Data | ds_rdm198hdddir

Fanuc Focas Library | Data | ds_rdm198host

Connected host number for the M198(subprogram call) is acquired.... [read more]
Fanuc Focas Library | Data | ds_rdm198host

Fanuc Focas Library | Data | ds_rdmntinfo

The data for troubleshooting is acquired as maintenance information for the file transfer between the DATA SERVER and CNC.... [read more]
Fanuc Focas Library | Data | ds_rdmntinfo

Fanuc Focas Library | Data | ds_rdmode

Get the mode for the DATA SERVER.... [read more]
Fanuc Focas Library | Data | ds_rdmode

Fanuc Focas Library | Data | ds_rdncfile

The NC program is inputted from the hard drive to the NC. Storage mode : To CNC memory from hard disk(or ATA) of DATA SERVER... [read more]
Fanuc Focas Library | Data | ds_rdncfile

Fanuc Focas Library | Data | ds_rdncfile2

The NC program is inputted from the hard drive to the NC. Storage mode : To CNC memory from hard disk(or ATA) of DATA SERVER... [read more]
Fanuc Focas Library | Data | ds_rdncfile2

Fanuc Focas Library | Data | ds_rdresult

Get the execution result of the function for the following DATA SERVER.... [read more]
Fanuc Focas Library | Data | ds_rdresult

Fanuc Focas Library | Data | ds_renhddfile

The file name in the hard disk of the DATA SERVER is changed.... [read more]
Fanuc Focas Library | Data | ds_renhddfile

Fanuc Focas Library | Data | ds_searchresult

Gets the result of ds_searchword function.... [read more]
Fanuc Focas Library | Data | ds_searchresult

Fanuc Focas Library | Data | ds_searchword

The string of the NC program in DATA SERVER at the running of M198/DNC in MEM/RMT mode is searched. The result of search can... [read more]
Fanuc Focas Library | Data | ds_searchword

Fanuc Focas Library | Data | ds_wrdnchddfile

The file name in the hard disk of the DATA SERVER for DNC operation is set. The current work directory is... [read more]
Fanuc Focas Library | Data | ds_wrdnchddfile

Fanuc Focas Library | Data | ds_wrdnchostfile

The file name of the host computer for DNC operation is set. The current connected host computer is set... [read more]
Fanuc Focas Library | Data | ds_wrdnchostfile

Fanuc Focas Library | Data | ds_wrfile

Transfers file from hard disk on personal computer to DATA SERVER. This function is effective in only 16i/18i/21i. and, this function... [read more]
Fanuc Focas Library | Data | ds_wrfile

Fanuc Focas Library | Data | ds_wrhostno

The host computer which works the FTP server which becomes the other party of the communication of the DATA SERVER is changed.... [read more]
Fanuc Focas Library | Data | ds_wrhostno

Fanuc Focas Library | Data | ds_wrm198hdddir

The work directory for the M198(subprogram call) is set. The current directory in the hard disk of the... [read more]
Fanuc Focas Library | Data | ds_wrm198hdddir

Fanuc Focas Library | Data | ds_wrm198host

Connected host number for the M198(subprogram call) is set. The connected host of now becomes the host for... [read more]
Fanuc Focas Library | Data | ds_wrm198host

Fanuc Focas Library | Data | ds_wrmode

Set the mode for the DATA SERVER. The mode of the DATA SERVER which can be set is shown as follows.... [read more]
Fanuc Focas Library | Data | ds_wrmode

Fanuc Focas Library | Data | ds_wrncfile

The NC program is outputted from the NC to the hard drive. Storage mode : To hard disk(or ATA) of DATA SERVER from CNC... [read more]
Fanuc Focas Library | Data | ds_wrncfile

Fanuc Focas Library | Data | etb_rderrmsg

Get the error message which occurred in the Ethernet board. This function acquires the error message of the Ethernet board... [read more]
Fanuc Focas Library | Data | etb_rderrmsg

Fanuc Focas Library | Data | etb_rdparam

Get the parameter of ethernet board. The following parameter can be acquired by this function.... [read more]
Fanuc Focas Library | Data | etb_rdparam

Fanuc Focas Library | Data | etb_wrparam

Set the parameter for Ethernet board. The following parameter can be set to the Ethernet board. Parameter... [read more]
Fanuc Focas Library | Data | etb_wrparam

Fanuc Focas Library | Data | eth_clrlog

Clear the logs for Ethernet function : Embedded Ethernet[Internal port ,PCMCIA Card], Fast Ethernet board, Fast DATA SERVER board, Windows CE... [read more]
Fanuc Focas Library | Data | eth_clrlog

Fanuc Focas Library | Data | eth_dschkdsk

Check disk of ATA card on DATA SERVER.... [read more]
Fanuc Focas Library | Data | eth_dschkdsk

Fanuc Focas Library | Data | eth_dsformat

Format ATA card on DATA SERVER.... [read more]
Fanuc Focas Library | Data | eth_dsformat

Fanuc Focas Library | Data | eth_rddsformat

Get the format of ATA card on DATA SERVER.... [read more]
Fanuc Focas Library | Data | eth_rddsformat

Fanuc Focas Library | Data | eth_rddsm198dir

Get the work folder for the M198 on DATA SERVER using Strage mode.... [read more]
Fanuc Focas Library | Data | eth_rddsm198dir

Fanuc Focas Library | Data | eth_rddsm198host

Get the connected host number and work folder for the M198 on DATA SERVER using FTP mode.... [read more]
Fanuc Focas Library | Data | eth_rddsm198host

Fanuc Focas Library | Data | eth_rddsmode

Get the all channel modes on DATA SERVER.... [read more]
Fanuc Focas Library | Data | eth_rddsmode

Fanuc Focas Library | Data | eth_rddsstate

Get each path of maintenance information on DATA SERVER.... [read more]
Fanuc Focas Library | Data | eth_rddsstate

Fanuc Focas Library | Data | eth_rdhost

Get the host number selected current Ethernet function.... [read more]
Fanuc Focas Library | Data | eth_rdhost

Fanuc Focas Library | Data | eth_rdlog

MTConnect Fanuc Adapter... [read more]
Fanuc Focas Library | Data | eth_rdlog

Fanuc Focas Library | Data | eth_rdparam

Get the parameters for Ethernet function : Fast Ethernet board, Fast DATA SERVER... [read more]
Fanuc Focas Library | Data | eth_rdparam

Fanuc Focas Library | Data | eth_wrdsm198dir

Set the work folder for the M198 on DATA SERVER using Strage mode.... [read more]
Fanuc Focas Library | Data | eth_wrdsm198dir

Fanuc Focas Library | Data | eth_wrdsm198host

Set the connected host number and work folder for the M198 on DATA SERVER using FTP mode.... [read more]
Fanuc Focas Library | Data | eth_wrdsm198host

Fanuc Focas Library | Data | eth_wrdsmode

Change the mode for DATA SERVER function.... [read more]
Fanuc Focas Library | Data | eth_wrdsmode

Fanuc Focas Library | Data | eth_wrhost

Set the host number selected Ethernet function.... [read more]
Fanuc Focas Library | Data | eth_wrhost

Fanuc Focas Library | Data | eth_wrparam

Sets the parameters for Ethernet function : Fast Ethernet board, Fast DATA SERVER... [read more]
Fanuc Focas Library | Data | eth_wrparam

Fanuc Focas Library | Data | flist_Data

CNC: Function Reference related to data server,DNC1,DNC2,OSI-Ethernet... [read more]
Fanuc Focas Library | Data | flist_Data
Modified: 2023-12-05