CNC_RDPSCDPIRC | LASER

Specify the library handle. See "Library handle" for details.

Specify the start piercing data group number.

·Series 16i/18i-L

·Series 30i/31i-LB

When addition of the cutting condition data option is not provided.

When addition of the cutting condition data option is provided.

Pointer to the number of piercing data. Specify the number of piercing data to be read before function call, and the number of piercing data being read actually is stored after the function call.

Pointer to the IODBPIRC structure including the piercing data of the cutting condition file. The IODBPIRC structure is as follows.

·Series 16i/18i-L
typedef struct iodbpirc {
    short   slct;       /* Flag of valid data */
    short   power;      /* Peak power */
    short   freq;       /* Initial frequency */
    short   duty;       /* Initial duty */
    short   i_freq;     /* Step frequency */
    short   i_duty;     /* Step duty */
    short   step_t;     /* Step time */
    short   step_sum;   /* Step number */
    long    pier_t;     /* Piercing time */
    short   g_press;    /* Assist gas pressure */
    short   g_kind;     /* Assist gas select */
    short   g_time;     /* Assist gas setting time */
    short   def_pos;    /* Reference displace */
    short   reserve[4]; /* (reserve) */
} IODBPIRC ;
·Series 30i/31i-LB
typedef struct iodbpirc {
    short   slct;        /* Flag of valid data      */
    short   power;       /* Peak power              */
    short   freq;        /* Initial frequency       */
    short   duty;        /* Initial duty            */
    short   i_freq;      /* Step frequency          */
    short   i_duty;      /* Step duty               */
    short   step_t;      /* Step time               */
    short   step_sum;    /* Step number             */
    long    pier_t;      /* Piercing time           */
    short   g_press;     /* Assist gas pressure     */
    short   g_kind;      /* Assist gas select       */
    short   g_time;      /* Assist gas setting time */
    short   def_pos;     /* Reference displace      */
    long    def_pos2;    /* Reference displace 2    */
    char    gap_axis;    /* Gap control axis        */
    char    def_pos2_dec;/* Decimals places         */
    short   reserve;     /* (reserve)               */
} IODBPIRC ;

slct

Flag of valid data is set.

·Series 16i/18i-L

bit 0	:	Peak power
bit 1	:	Initial frequency
bit 2	:	Initial duty
bit 3	:	Step frequency
bit 4	:	Step duty
bit 5	:	Step time
bit 6	:	Step number
bit 7	:	Piercing time
bit 8	:	Assist gas pressure
bit 9	:	Assist gas select
bit10	:	Assist gas setting time
bit11	:	Reference displace
bit12,..,15	:	(reserve)

·Series 30i/31i-LB

bit 0	:	Peak power
bit 1	:	Initial frequency
bit 2	:	Initial duty
bit 3	:	Step frequency
bit 4	:	Step duty
bit 5	:	Step time
bit 6	:	Step number
bit 7	:	Piercing time
bit 8	:	Assist gas pressure
bit 9	:	Assist gas select
bit10	:	Assist gas setting time
bit11	:	Reference displace
bit12	:	Reference displace 2
bit13	:	Gap control axis
bit14,..,15	:	(reserve)

* When a bit is 0, it means the corresponding data has no meaning.

power

Peak power is set.

(Setting range: 0 to 9999, Unit: W)

freq

Initial frequency is set.

·Series 16i/18i-L

(Setting range: 5 to 2000, Unit: Hz)

·Series 30i/31i-LB

(Setting range: 1 to 3276, Unit: Hz)

duty

Initial duty is set.

(Setting range: 0 to 100, Unit: %)

i_freq

Step frequency is set.

·Series 16i/18i-L

(Setting range: 5 to 2000, Unit: Hz)

·Series 30i/31i-LB

(Setting range: 0 to 32767, Unit: Hz)

i_duty

Step duty is set.

(Setting range: 0 to 99, Unit: %)

step_t

Step time is set.

(Setting range: 0 to 9999, Unit: 0.001second)

step_sum

Step number is set.

(Setting range: 0 to 99, Unit: time)

pier_t

Piercing time is set.

(Setting range: 1 to 999999, Unit: 0.001sec.)

g_press

Assist gas pressure is set.

·Series 16i/18i-L

(Setting range: 0 to 255, Unit: 0.1Kg/cm2)

·Series 30i/31i-LB

(Setting range: 0 to 9999, Unit: 0.01MPa, 0.1Kg/cm2)

g_kind

Assist gas select is set.

·Series 16i/18i-L

(Setting range: 1 to 7, Unit: kind)

·Series 30i/31i-LB

(Setting range: 1 to 15, Unit: kind)

g_time

Assist gas setting time is set.

(Setting range: 0 to 99, Unit: 0.1second)

def_pos

Reference displace is set.

(Setting range: -32767 to 32767, Unit: 0.001mm)

def_pos2

·Series 30i/31i-LB only

Reference displace 2 is set.

(Setting range: -999999999 to 999999999, Unit: mm, inch(input unit))

gap_axis

·Series 30i/31i-LB only

Whether The first gap control axis axis or The second gap control axis axis is commanded as a gap control axis is set.

The meaning of a set value of gap_axis is shown in the following table.

gap_axis	Setting of the gap control axis
0	The second gap control axis.
1	The first gap control axis.
-1	The gap control is invalid.

def_pos2_dec

·Series 30i/31i-LB only

decimals places in Reference displace 2 is set.

(Setting range: 0 to 9)

The corresponding data is as follows.

decimals places	corresponding data
def_pos2_dec	def_pos2

reserve

(reserve)