Description
Writes the standard displacement.
Universal Fanuc Driver
Fanuc Focas Library CD
Declaration
Arguments
Specify the library handle. See "Library handle" for details.
A pointer to the iodbdsplc structure in which to specify the standard displacement. The IODBDSPLC structure is as follows.
typedef struct iodbdsplc {
short slct; /* Flag of data selection */
long dsplc; /* Standard displacement */
short dsplc_dec; /* Decimals places */
char reserve; /* (reserve) */
short reserves[4];/* (reserve) */
} IODBDSPLC ;
- slct
- Flag of data selection must be set.
bit 0 : Standard displacement bit1,..,15 : (not used) - * In order to write the data to CNC, turn on the corresponding bit on this data.
- dsplc
- Specifies the standard displacement.
- (Setting range:parameter No. 15531 to No. 15532 ,Unit:mm?inch
- dsplc_dec
- Specifies the number of decimals places at dsplc (the standard displacement).
- (Setting range:0 to 9)
- The corresponding data is as follows.
- reserve
- (reserve)
| decimals places | corresponding data |
|---|---|
| dsplc_dec | dsplc |
Return
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
| Return code | Meaning/Error handling |
|---|---|
(1) |
This function cannot be used except 30i/31i-LB. |
(5) |
Error of standard displacement. |
(6) |
The extended driver/library function is necessary. |
(9) |
Mistake of laser oscillator (parameter No.15030) |
As for the other return codes or the details, see "Return status of Data window function"
CNC option
For HSSB connection,
For Ethernet connection,
The Ethernet function and the extended driver/library function are necessary. When Embedded Ethernet is used,above two optional functions are not required.
When Ethernet board is used,
- only Ethernet function is required.
CNC parameter
This function is related to the following CNC parameter.
See the manual of CNC parameter for details.
CNC mode
This function can be used in any CNC mode.
Available CNC
| 0i-A | 0i-B/C(Note) | 0i-D | 0i-F | 15 | 15i | 16 | 18 | 21 | 16i-A | 18i-A | 21i-A | 16i-B | 18i-B | 21i-B | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M (Machining) | |||||||||||||||||
| T (Turning) | - | ||||||||||||||||
| LC (Loader) | - | - | - | - | - | - | - | - |
| 0i-D | 0i-F | 16i | 18i | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|
| P (Punch press) | - | |||||
| L (Laser) | - | - | - | - | ||
| W (Wire) | - | - |
| Power Mate i-D | |
| Power Mate i-H | |
| Power Motion i-A | - |
| "O" | : | Both Ethernet and HSSB | |
| "E" | : | Ethernet | |
| "H" | : | HSSB | |
| "X" | : | Cannot be used | |
| "-" | : | None |
Note) 0i-C does not support the HSSB function.
See Also
