CNC_RDDIAGNUM | MISC

Description

Declaration

Arguments

typedef struct odbdiagnum {
        unsigned short diag_min ;
                        /* mininum number of diagnosis data */
        unsigned short diag_max ;
                        /* maximum number of diagnosis data */
        unsigned short total_no ;
                        /* total number of diagnosis data */
} ODBDIAGNUM ;

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

As for the other return codes or the details, see "Return status of Data window function"

CNC option

For HSSB connection,

The extended driver/library function is necessary.

For Ethernet connection,

The Ethernet function and the extended driver/library function are necessary.

However, in case of Series 16i/18i/21i-B, 0i-B/C/D/F, Series 30i and PMi-A, the required CNC option is as follows.

When Embedded Ethernet is used,

above two optional functions are not required.

When Ethernet board is used,

only Ethernet function is required.

CNC parameter

This function is not related to CNC parameter.

CNC mode

This function can be used in any CNC mode.

Available CNC

Note) 0i-C does not support the HSSB function.

See Also

cnc_diagnoss   cnc_diagnosr   cnc_rddiag_ext   cnc_rddiaginfo