CNC_WROPNLSGNL | MISC

Specify the library handle. See "Library handle" for details.

Pointer to the IODBSGNL structure to set the output signal of software operator's panel.

Series 15/15i

typedef struct iodbsgnl {
    short   datano;     /* (Not used) */
    short   type;       /* Data select flag */
    short   mode;       /* Mode signal */
    short   hndl_ax;    /* Manual handle feed axis selection signal */
    short   hndl_mv;    /* Manual handle feed travel distance selection signal */
    short   rpd_ovrd;   /* Rapid traverse override signal */
    short   jog_ovrd;   /* Manual feedrate override signal*/
    short   feed_ovrd;  /* Feedrate override signal */
    short   spdl_ovrd;  /* Spindle override signal (only Series 15i) */
    short   blck_del;   /* Optional block skip signal(0/1)*/
    short   sngl_blck;  /* Single block signal(0/1) */
    short   machn_lock; /* Machine lock signal(0/1) */
    short   dry_run;    /* Dry run signal(0/1) */
    short   mem_prtct;  /* Memory protection signal(0/1) */
    short   feed_hold;  /* Automatic operation halt signal(0/1) */
    short   manual_rpd; /* (Not used) */
    short   dummy[2];   /* (Not used) */
} IODBSGNL ;

Series 16/18/21, 16i/18i/21i, 0i, 30i, Power Mate i, PMi-A

typedef struct iodbsgnl {
     short     datano;     /* (Not used) */
     short     type;       /* Data select flag */
     short     mode;       /* Mode signal */
     short     hndl_ax;    /* Manual handle feed axis selection signal */
     short     hndl_mv;    /* Manual handle feed travel distance selection signal */
     short     rpd_ovrd;   /* Rapid traverse override signal */
     short     jog_ovrd;   /* Manual feedrate override signal*/
     short     feed_ovrd;  /* Feedrate override signal */
     short     spdl_ovrd;  /* (Not used) */
     short     blck_del;   /* Optional block skip signal(0/1)*/
     short     sngl_blck;  /* Single block signal(0/1) */
     short     machn_lock; /* Machine lock signal(0/1) */
     short     dry_run;    /* Dry run signal(0/1) */
     short     mem_prtct;  /* Memory protection signal(0/1) */
     short     feed_hold;  /* Automatic operation halt signal(0/1) */
} IODBSGNL ;

datano

Not used

type

Specify the data selection flag.

bit 0	:	Mode signal
bit 1	:	Manual handle feed axis selection signal
bit 2	:	Manual handle feed travel distance selection signal
bit 3	:	Rapid traverse override signal
bit 4	:	Manual feedrate override signal
bit 5	:	Feedrate override signal
bit 6	:	Spindle override signal (only Series 15i)
bit 6	:	(Not used)
bit 7	:	Optional block skip signal
bit 8	:	Single block signal
bit 9	:	Machine lock signal
bit 10	:	Dry run signal
bit 11	:	Memory protection signal
bit 12	:	Automatic operation halt signal
bit 13	:	(Not used)
bit 14	:	(Not used)
bit 15	:	(Not used)

* When the bit corresponding to the signal is set to 0, that signal is not written. To write the signal, set the corresponding bit to 1.

mode

Specify the mode signal.

Series 15/15i

0	:	MDI
1	:	MEM
2	:	EDIT
3	:	HND
4	:	JOG
5	:	REF
6	:	DNC
7	:	INC

Series 16/18/21, 16i/18i/21i, 0i, 30i, Power Mate i, PMi-A

0	:	MDI
1	:	MEM
2	:	EDIT
3	:	HNDL or INC
4	:	JOG
5	:	REF

hndl_ax

Specify the manual handle feed axis selection signal.

0	:	HX
1	:	HY
2	:	HZ
3	:	H4

hndl_mv

Specify the manual handle feed travel distance selection signal.

0	:	×1
1	:	×10
2	:	×100

rpd_ovrd

Specify the rapid traverse override signal.

0	:	100%
1	:	50%
2	:	25%
3	:	F0

jog_ovrd

Specify the manual feedrate override signal.

0	:	0%	10	:	2.0%	20	:	52.0%
1	:	0.1%	11	:	2.7%	21	:	72.0%
2	:	0.14%	12	:	3.7%	22	:	100%
3	:	0.2%	13	:	5.2%	23	:	140%
4	:	0.27%	14	:	7.2%	24	:	200%
5	:	0.37%	15	:	10.0%
6	:	0.52%	16	:	14.0%
7	:	0.72%	17	:	20.0%
8	:	1.0%	18	:	27.0%
9	:	1.4%	19	:	37.0%

feed_ovrd

Specify the feedrate override signal.

0	:	0%	10	:	100%	20	:	200%
1	:	10%	11	:	110%
2	:	20%	12	:	120%
3	:	30%	13	:	130%
4	:	40%	14	:	140%
5	:	50%	15	:	150%
6	:	60%	16	:	160%
7	:	70%	17	:	170%
8	:	80%	18	:	180%
9	:	90%	19	:	190%

spdl_ovrd

Specify the spindle override signal. (only Series 15i)

0	:	0%	10	:	100%	20	:	200%
1	:	10%	11	:	110%
2	:	20%	12	:	120%
3	:	30%	13	:	130%
4	:	40%	14	:	140%
5	:	50%	15	:	150%
6	:	60%	16	:	160%
7	:	70%	17	:	170%
8	:	80%	18	:	180%
9	:	90%	19	:	190%

Not used

blck_del

Specify the optional block skip signal (0/1).

sngl_blck

Specify the single block signal (0/1).

machn_lock

Specify the machine lock signal (0/1).

dry_run

Specify the dry run signal (0/1).

mem_prtct

Specify the memory protection signal (0/1).

feed_hold

Specify the automatic operation halt signal (0/1).

manual_rpd

Not used.