Description
Reads the available number of work zero offset. It is stored in "*use_no" with signed binary format.
Universal Fanuc Driver
Fanuc Focas Library CD
Declaration
Arguments
Specify the library handle. See "Library handle" for details.
Available number of work zero offset
- Series 15/15i, 0i-D
- Series 16/18/21, 16i/18i/21i, 0i
- Series 0i-F, 30i
- Series 16i/18i-W
| M series | 7/55 sets |
| M series | 7/55/307 sets |
| T series | 7 sets |
| 7/55/307 sets |
| 7 sets |
Return
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
| Return code | Meaning/Error handling |
|---|---|
(6) |
This function needs the work zero offset option. |
As for the other return codes or the details, see "Return status of Data window function"
CNC option
And this function is related to the following CNC option.
- Series 15/15i, 0i-D
- Series 16/18/21, 16i/18i/21i, 0i-A/B/C
- Series 0i-F
- Series 30i
M series
Work zero offset 48 sets
M series
Work zero offset
Work zero offset 48 sets
Work zero offset 300 sets
T series
Work zero offset
Work zero offset 300 sets
Work zero offset
Work zero offset 48 sets
Work zero offset 300 sets
For HSSB connection,
For Ethernet connection,
The Ethernet function and the extended driver/library function are necessary. However, in case of FS16i/18i/21i-B, 0i-B/C/D/F and 30i, the required CNC option is as follows. When Embedded Ethernet is used, above two optional functions are not required. When Ethernet board is used, only Ethernet function is required.
CNC parameter
This function is not related to CNC parameter.
CNC mode
This function can be used in any CNC mode.
Available CNC
| 0i-A | 0i-B/C(Note) | 0i-D | 0i-F | 15 | 15i | 16 | 18 | 21 | 16i-A | 18i-A | 21i-A | 16i-B | 18i-B | 21i-B | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M (Machining) | |||||||||||||||||
| T (Turning) | - | ||||||||||||||||
| LC (Loader) | - | - | - | - | - | - | - | - |
| 0i-D | 0i-F | 16i | 18i | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|
| P (Punch press) | - | |||||
| L (Laser) | - | - | - | - | ||
| W (Wire) | - | - |
| Power Mate i-D | |
| Power Mate i-H | |
| Power Motion i-A | X |
| "O" | : | Both Ethernet and HSSB | |
| "E" | : | Ethernet | |
| "H" | : | HSSB | |
| "X" | : | Cannot be used | |
| "-" | : | None |
Note) 0i-C does not support the HSSB function.
See Also
cnc_rdzofs cnc_wrzofs cnc_rdzofsr cnc_wrzofsr
