CNC_ZOFS_RNGE | NCDATA

Description

Declaration

Arguments

typedef struct odbdatrng {
    long    data_min ;   /* lower limit */
    long    data_max ;   /* upper limit */
    long    status;      /* status of setting value */
} ODBDATRNG ;

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

As for the other return codes or the details, see "Return status of Data window function"

CNC option

And this function is related to the following CNC option.

• Series 0i-F

Work zero offset 300 sets



• Series 30i

Work zero offset

Work zero offset 48 sets

Work zero offset 300 sets

IS-C,IS-D,IS-E

For HSSB connection,

The extended driver/library function is necessary.

For Ethernet connection,

The Ethernet function and the extended driver/library function are necessary.

However, in case of Series 0i-D/F and Series 30i, the required CNC option is as follows.

When Embedded Ethernet is used,

above two optional functions are not required.

When Ethernet board is used,

only Ethernet function is required.

CNC parameter

This function is related to the following CNC parameter.
See the manual of CNC parameter for details.

• Series 30i
1013#3,#2,#1,#0

• Series 0i-D/F
1013#1,#0

CNC mode

This function can be used in any CNC mode.

Available CNC

Note) 0i-C does not support the HSSB function.