PMC_WRPRMSTART | PMC

Description

Starts downloading the PMC parameter(timer, counter, keep relay, and data) of the tape format.

To downloading of PMC parameter, this function, pmc_wrpmcparam and pmc_wrprmend is used.

The procedure of downloading the PMC parameter is shown as follows.

*	Repeatedly download the PMC parameter until the return value of pmc_wrpmcparam becomes excepting EW_OK or writing data is lost.
*	Judge final result of the downloading of PMC parameter from the return value of pmc_wrprmend.
*	In case of 0i-F, 30i/31i/32i, please beforehand select the PMC unit type which becomes the object by pmc_select_pmc_unit.

When you execute this function, set '1' for PWE of the CNC parameter and make the state of CNC an emergency stop. MTConnect Fanuc Adapter

Universal Fanuc Driver

Fanuc Focas Library CD

Declaration

#include "fwlib32.h" or "fwlib64.h"

FWLIBAPI short WINAPI pmc_wrprmstart(unsigned short FlibHndl);

Arguments : HSSB

FlibHndl [ in ]

Specify the library handle.
See "Library handle" for details.

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

Return code	Meaning/Error handling
EW_BUSY (-1)	Busy pmc_rdprmstart or pmc_wrprmstart function has been already executed.
EW_NOOPT (6)	no option
EW_PARAM (9)	Parameter error CNC parameter(PWE) is '0'.
EW_REJECT (13)	CNC execution rejection CNC is not in "Emergency" state.

As for the other return codes or the details, see "Return status of Data window function"

CNC option

For HSSB connection,

The extended driver/library function is necessary.

CNC parameter

This function is related to the following CNC parameter.
See the manual of CNC parameter for details.

No.8900#0(PWE) (must be set)

CNC mode

This function can be used in any CNC mode.

Available CNC

	0i-A	0i-B/C(Note)	0i-D	0i-F	15	15i	16	18	21	16i-A	18i-A	21i-A	16i-B	18i-B	21i-B	30i-A	30i-B
M (Machining)	X	X	O	O	X	X	X	X	X	H	H	H	H	H	H	H	O
T (Turning)	X	X	O	O	X	-	X	X	X	H	H	H	H	H	H	H	O
LC (Loader)	-	-	-	-	-	-	X	X	X	H	H	H	H	H	H	-	-

	0i-D	0i-F	16i	18i	30i-A	30i-B
P (Punch press)	H	H	H	H	-	H
L (Laser)	-	-	H	-	-	H
W (Wire)	-	-	X	X	X	X

Power Mate i-D	X
Power Mate i-H	X
Power Motion i-A	X

	"O"	:	Both Ethernet and HSSB
	"E"	:	Ethernet
	"H"	:	HSSB
	"X"	:	Cannot be used
	"-"	:	None

Note) 0i-C does not support the HSSB function.

See Also

pmc_rdprmstart pmc_rdpmcparam pmc_rdprmend pmc_wrpmcparam pmc_wrprmend

Privacy notice

This website uses cookies. By continuing to use it you agree to our privacy policy.

https://www.inventcom.net/fanuc-focas-library/pmc/pmc_wrprmstart

Fanuc Focas Library | Pmc | flist_Pmc

PMC: Function related to PMC... [read more]

Fanuc Focas Library | Pmc | pmc_crdmsg

Reads the data of 32 bytes transmitted from the PMC. It is necessary to transmit the data on the PMC side to read the... [read more]

Fanuc Focas Library | Pmc | pmc_cwrmsg

Writes the data of 32 bytes transmitted to the PMC. It is necessary to receive the data on the PMC side to write the... [read more]

Fanuc Focas Library | Pmc | pmc_getdtailerr

Gets the detailed error information after the function has been executed. The detailed error information is stored in err_no, err_dtno of... [read more]

Fanuc Focas Library | Pmc | pmc_get_current_pmc_unit

Get the current PMC unit type.... [read more]

Fanuc Focas Library | Pmc | pmc_get_number_of_pmc

Reads the number of existing PMC paths (i.e. number of unit).... [read more]

Fanuc Focas Library | Pmc | pmc_get_pmc_unit_types

Reads the PMC system information that shows what kind of PMC units compose the multi-path PMC system.... [read more]

Fanuc Focas Library | Pmc | pmc_get_timer_type

Reads the PMC timer type of the specified timer number.... [read more]

Fanuc Focas Library | Pmc | pmc_kpmsiz

Reads the maximum size of the extended backup memory.... [read more]

Fanuc Focas Library | Pmc | pmc_rdalmmsg

Reads the alarm messages from PMC.... [read more]

Fanuc Focas Library | Pmc | pmc_rdcntldata

Reads the control data to manage PMC data table (address D). This function is not available at PMC-NA. Refer to the programming... [read more]

Fanuc Focas Library | Pmc | pmc_rdcntlgrp

Reads the total number of groups of the control data to manage PMC data table(address D). This function is not available at PMC-NA.... [read more]

Fanuc Focas Library | Pmc | pmc_rdkpm

Reads the contents of the extended backup memory of PMC specified by offset, length. The data are stored in data... [read more]

Fanuc Focas Library | Pmc | pmc_rdkpm2

Reads the contents of the extended backup memory of PMC specified by offset, length. The data are stored in data... [read more]

Fanuc Focas Library | Pmc | pmc_rdmsg

Reads the data of 32 bytes transmitted from the PMC. It is necessary to transmit the data on the PMC side to read the... [read more]

Fanuc Focas Library | Pmc | pmc_rdpmcinfo

Reads the data information about the attribute of each kind of PMC, the effective range of PMC address, etc.... [read more]

Fanuc Focas Library | Pmc | pmc_rdpmcparam

The PMC parameter(timer, counter, keep relay, and data) is uploaded by the tape format. When you execute this function, change to... [read more]

Fanuc Focas Library | Pmc | pmc_rdpmcrng

Reads the PMC data of the specified PMC address/range. This function is used to exchange the data between the... [read more]

Fanuc Focas Library | Pmc | pmc_rdpmctitle

Reads the PMC title data from PMC. When this function is executed while editing the title data with PMC, the return value... [read more]

Fanuc Focas Library | Pmc | pmc_rdprmend

End of upload of the PMC parameter(timer, counter, keep relay, and data) by the tape format. This function is executable other... [read more]

Fanuc Focas Library | Pmc | pmc_rdprmstart

Starts uploading the PMC parameter(timer, counter, keep relay, and data) of the tape format. To uploading of PMC parameter, this... [read more]

Fanuc Focas Library | Pmc | pmc_select_pmc_unit

Selects PMC that will be the target of other PMC FOCAS2 function by the unit type.... [read more]

Fanuc Focas Library | Pmc | pmc_set_timer_type

Writes the PMC timer type of the specified timer number.... [read more]

Fanuc Focas Library | Pmc | pmc_wrcntldata

Writes the control data to manage PMC data table (address D). This function is not available at PMC-NA. Refer to the programming... [read more]

Fanuc Focas Library | Pmc | pmc_wrcntlgrp

Writes the total number of groups of the control data to manage PMC data table(address D). This function is not available at PMC-NA.... [read more]

Fanuc Focas Library | Pmc | pmc_wrkpm

Writes the data to the extended backup memory of PMC specified by offset, length. The data must be stored in data as... [read more]

Fanuc Focas Library | Pmc | pmc_wrkpm2

Writes the data to the extended backup memory of PMC specified by offset, length. The data must be stored in data as... [read more]

Fanuc Focas Library | Pmc | pmc_wrmsg

Writes the data of 32 bytes transmitted to the PMC. It is necessary to receive the data on the PMC side to write the... [read more]

Fanuc Focas Library | Pmc | pmc_wrpmcparam

The PMC parameter(timer, counter, keep relay, and data) is downloaded by the tape format. When you execute this function, set... [read more]

Fanuc Focas Library | Pmc | pmc_wrpmcrng

Writes the PMC data of the specified PMC address/range. This function is used to exchange the data between the... [read more]

Fanuc Focas Library | Pmc | pmc_wrprmend

End of download of the PMC parameter(timer, counter, keep relay, and data) by the tape format. Even if the PWE of CNC parameter is... [read more]

Modified: 2023-12-05