Description
Universal Fanuc Driver
Fanuc Focas Library CD
Declaration
Arguments : HSSB
Specify the library handle.
See "Library handle" for details.
Following three types of logging messages are returned.
Each logging messages is separated by a control MODEL dependent delimiting character
and terminated with NULL character.
| <CCCC> | : | CCCC | Command part of datagram |
| <NNNN0Xeeee> | : | NNNN | Negative response (Command part of datagram) |
| eeee | Error code | ||
| <Ennn0Xssdd> | : | Ennn | Error code of data link layer |
| ss | Error sub-code (matrix status of data link layer) | ||
| dd | Error sub-code (Error data) |
- Series 15 Maximum 500 characters including NULL are returned.
- Series 16/18, 16i/18i/21i Maximum 440 characters including NULL are returned.
Delimiting character is ASCII "|".
Delimiting character is ASCII ":".
If there are not enough space to store above characters, the operation of this function is not guaranteed.
Return
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
| Return code | Meaning/Error handling |
|---|---|
(1) |
This function cannot be used at TT. |
(6) |
The DNC2 option, and the extended driver/library function are necessary. |
As for the other return codes or the details, see "Return status of Data window function"
CNC option
For HSSB connection,
CNC parameter
This function is not related to CNC parameter.
CNC mode
This function can be used in any CNC mode.
Available CNC
| 0i-A | 0i-B/C(Note) | 0i-D | 0i-F | 15 | 15i | 16 | 18 | 21 | 16i-A | 18i-A | 21i-A | 16i-B | 18i-B | 21i-B | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M (Machining) | |||||||||||||||||
| T (Turning) | - | ||||||||||||||||
| LC (Loader) | - | - | - | - | - | - | - | - |
| 0i-D | 0i-F | 16i | 18i | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|
| P (Punch press) | - | |||||
| L (Laser) | - | - | - | - | ||
| W (Wire) | - | - |
| Power Mate i-D | |
| Power Mate i-H | |
| Power Motion i-A | X |
| "O" | : | Both Ethernet and HSSB | |
| "E" | : | Ethernet | |
| "H" | : | HSSB | |
| "X" | : | Cannot be used | |
| "-" | : | None |
Note) 0i-C does not support the HSSB function.
