NewsCNCnetPDMAbout usSupport
  

DS_WRNCFILE | DATA

Description

The NC program is outputted from the NC to the hard drive.

  • Storage mode :
    • To hard disk(or ATA) of DATA SERVER from CNC memory.
  • FTP mode :
    • To hard disk of PC from CNC memory.

    The wild-card("*", "?") cannot be used to specify the name.     MTConnect Fanuc Adapter

    Universal Fanuc Driver

    Fanuc Focas Library CD

    Declaration

    #include "fwlib32.h"

    FWLIBAPI short WINAPI ds_wrncfile(unsigned short FlibHndl, short type, long prog_no);

    Arguments : HSSB

    FlibHndl   [ in ]

    Specify the library handle. See "Library handle" for details.

    type   [ in ]

    Specify the file type.

    0: The specified program number is output.
    1: All programs in NC are output.

    * When type=1 is specified, program number (prog_no) is disregarded. And, the file name becomes "ALLPRG".

    prog_no   [ in ]

    Specify the pointer to the string where the file name which wants to be outputted to the DATA SERVER is stored. The file by which the specified number is assumed to be a file name is made on the DATA SERVER.

    Return

    EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

    The major error codes are as follows.

    Return code Meaning/Error handling
    EW_RESET
    (-2)    		 Reset request
    Process is canceled by [RESET].
    EW_BUSY
    (-1)    		 Busy
    The CNC state is as follows.
  • Alarm(PS000, PS101) in CNC side
  • I/O channel number(CNC parameter) is wrong.
  • Background edit processing in CNC side.
  • MDI program is editing or running in CNC side.
    		•
    EW_NUMBER
    (3)    		 Data number error
    The specified file has already been registered in the DATA SERVER.
    EW_ATTRIB
    (4)    		 Data attribute error
    The file type(type) is wrong.
    EW_DATA
    (5)    		 Data error
    The program is not registered.
    EW_NOOPT
    (6)    		 No option
    EW_PROT
    (7)    		 Protection error
    The program is protected.
    EW_REJECT
    (13)    		 CNC execution rejection
    The DATA SERVER is doing another processing.
    EW_DTSRVR
    (14)    		 DATA SERVER error
    Error occurred in DATA SERVER.

    As for the other return codes or the details, see "Return status of Data window function"

    CNC option

    For HSSB connection,

      The DATA SERVER function and the extended driver/library function are necessary.

    CNC parameter

    This function is related to the following CNC parameter.
    See the manual of CNC parameter for details.

    • Series 16i/18i/21i
      • Parameter No.0020 = 5

    CNC mode

    This function can be used in any CNC mode.

    Available CNC

    0i-A 0i-B/C(Note) 0i-D 0i-F 15 15i 16 18 21 16i-A 18i-A 21i-A 16i-B 18i-B 21i-B 30i-A 30i-B
    M (Machining)X X X X X X X X X H H H H H H X X
    T (Turning) X X X X X - X X X H H H H H H X X
    LC (Loader) - - - - - - X X X X X X X X X - -

    0i-D0i-F16i18i30i-A30i-B
    P (Punch press)X X X X - X
    L (Laser) - - X - - X
    W (Wire) - - X X X X


    Power Mate i-DX
    Power Mate i-HX
    Power Motion i-AX

    "O" : Both Ethernet and HSSB
    "E" : Ethernet
    "H" : HSSB
    "X" : Cannot be used
    "-" : None

    Note) 0i-C does not support the HSSB function.

    See Also

    ds_rdncfile   ds_rdncfile2  

    Privacy notice

    This website uses cookies. By continuing to use it you agree to our privacy policy. 

    https://www.inventcom.net/fanuc-focas-library/data/ds_wrncfile

    Fanuc Focas Library | Data | cnc_clrmsgbuff

     Clears the receive buffer or the transmit buffer.... [read more]    		Fanuc Focas Library | Data | cnc_clrmsgbuff

    Fanuc Focas Library | Data | cnc_dschdir

     DATA SERVER Changing a current folder of the ATA card with DATA SERVER function. DATA SERVER Host... [read more]    		Fanuc Focas Library | Data | cnc_dschdir

    Fanuc Focas Library | Data | cnc_dscopyfile

     Copying a file in the ATA card with DATA SERVER function.... [read more]    		Fanuc Focas Library | Data | cnc_dscopyfile

    Fanuc Focas Library | Data | cnc_dsftpcancel

     This function is used to cancel the following operetions.... [read more]    		Fanuc Focas Library | Data | cnc_dsftpcancel

    Fanuc Focas Library | Data | cnc_dsftpstat

     The execution result(EW_OK/EW_DTSRVR) of the following function can be taken out only at once.... [read more]    		Fanuc Focas Library | Data | cnc_dsftpstat

    Fanuc Focas Library | Data | cnc_dsget_req

     Directs to GET a file to from a host computer at DATA SERVER. When this function is normally ended, it starts getting files from host... [read more]    		Fanuc Focas Library | Data | cnc_dsget_req

    Fanuc Focas Library | Data | cnc_dslistdel_req

     According to the list which exists in the ATA card of DATA SERVER functon, two or more files are deleted. When this function carries... [read more]    		Fanuc Focas Library | Data | cnc_dslistdel_req

    Fanuc Focas Library | Data | cnc_dslistget_req

     According to the list file which exists in the connection host of DATA SERVER function, the file transfer of two or more files is continuously carried... [read more]    		Fanuc Focas Library | Data | cnc_dslistget_req

    Fanuc Focas Library | Data | cnc_dslistput_req

     According to the list file which exists in the ATA card of DATA SERVER function ,the file transfer of two or more files is carried out to a connection... [read more]    		Fanuc Focas Library | Data | cnc_dslistput_req

    Fanuc Focas Library | Data | cnc_dsmget_req

     It directs to MGET a file from a host computer to DATA SERVER. A wild card can be used for a file name and the file transfer of two or... [read more]    		Fanuc Focas Library | Data | cnc_dsmget_req

    Fanuc Focas Library | Data | cnc_dsmkdir

     DATA SERVER A new folder is created to the current folder of the ATA card of DATA SERVER function. DATA SERVER... [read more]    		Fanuc Focas Library | Data | cnc_dsmkdir

    Fanuc Focas Library | Data | cnc_dsmput_req

     It directs to MPUT a file to a host computer from DATA SERVER. A wild card can be used for a file name and the file transfer of two or... [read more]    		Fanuc Focas Library | Data | cnc_dsmput_req

    Fanuc Focas Library | Data | cnc_dsput_req

     Directs to PUT a file to a host computer to DATA SERVER. When this function is normally ended, it starts putting files from host... [read more]    		Fanuc Focas Library | Data | cnc_dsput_req

    Fanuc Focas Library | Data | cnc_dsremove

     DATA SERVER The file in the current folder of the ATA card of DATA SERVER function delete. DATA SERVER Host... [read more]    		Fanuc Focas Library | Data | cnc_dsremove

    Fanuc Focas Library | Data | cnc_dsrename

     DATA SERVER Changing the file or folder name which exist in the current folder of the ATA card of DATA SERVER... [read more]    		Fanuc Focas Library | Data | cnc_dsrename

    Fanuc Focas Library | Data | cnc_dsrmdir

     DATA SERVER The folder in the current folder of the ATA card of DATA SERVER function delete. DATA SERVER... [read more]    		Fanuc Focas Library | Data | cnc_dsrmdir

    Fanuc Focas Library | Data | cnc_dtsvchkdsk

     Checks the hard disk on the DATA SERVER whether there is an error sector etc. or not. If this function is executed while... [read more]    		Fanuc Focas Library | Data | cnc_dtsvchkdsk

    Fanuc Focas Library | Data | cnc_dtsvcnclupdn

     Cancels the following if it is being executed. - Download from DATA SERVER to CNC - Upload from CNC to... [read more]    		Fanuc Focas Library | Data | cnc_dtsvcnclupdn

    Fanuc Focas Library | Data | cnc_dtsvdelete

     Deletes the file in the DATA SERVER. If this function is executed while... [read more]    		Fanuc Focas Library | Data | cnc_dtsvdelete

    Fanuc Focas Library | Data | cnc_dtsvdownload

     Orders the CNC to download the file from the DATA SERVER. Therefore, normal termination of this function shows that downloading the file from the DATA SERVER... [read more]    		Fanuc Focas Library | Data | cnc_dtsvdownload

    Fanuc Focas Library | Data | cnc_dtsvftpget

     Orders the DATA SERVER to get file from the host computer. Therefore, normal termination of this function shows that getting the file from the host computer... [read more]    		Fanuc Focas Library | Data | cnc_dtsvftpget

    Fanuc Focas Library | Data | cnc_dtsvftpput

     Orders the DATA SERVER to put file to the host computer. Therefore, normal termination of this function shows that putting the file to the host computer has... [read more]    		Fanuc Focas Library | Data | cnc_dtsvftpput

    Fanuc Focas Library | Data | cnc_dtsvftpstat

     The execution result of cnc_dtsvftpput ,... [read more]    		Fanuc Focas Library | Data | cnc_dtsvftpstat

    Fanuc Focas Library | Data | cnc_dtsvgetdncpg

     Gets the file name for DNC operation in the DATA SERVER.... [read more]    		Fanuc Focas Library | Data | cnc_dtsvgetdncpg

    Fanuc Focas Library | Data | cnc_dtsvgetmode

     Gets the current mode of the DATA SERVER(storage mode/buffer mode).... [read more]    		Fanuc Focas Library | Data | cnc_dtsvgetmode

    Fanuc Focas Library | Data | cnc_dtsvhdformat

     Formats the hard disk on the DATA SERVER. If this function is executed while... [read more]    		Fanuc Focas Library | Data | cnc_dtsvhdformat

    Fanuc Focas Library | Data | cnc_dtsvmntinfo

     Reads the following maintenance information for the DATA SERVER. This is the function for purposes of maintenance.... [read more]    		Fanuc Focas Library | Data | cnc_dtsvmntinfo

    Fanuc Focas Library | Data | cnc_dtsvrdcram

     Reads the contents of the interface buffer for the DATA SERVER. This is the function for purposes of maintenance.... [read more]    		Fanuc Focas Library | Data | cnc_dtsvrdcram

    Fanuc Focas Library | Data | cnc_dtsvrderrmsg

     Reads the message of the error occurred in the DATA SERVER.... [read more]    		Fanuc Focas Library | Data | cnc_dtsvrderrmsg

    Fanuc Focas Library | Data | cnc_dtsvrdfile

     Transfers file from DATA SERVER to hard disk on personal computer. This function is effective for the DATA SERVER board(10BASE-T), and... [read more]    		Fanuc Focas Library | Data | cnc_dtsvrdfile

    Fanuc Focas Library | Data | cnc_dtsvrdpgdir

     Reads the directory information in the DATA SERVER. If this function is executed while... [read more]    		Fanuc Focas Library | Data | cnc_dtsvrdpgdir

    Fanuc Focas Library | Data | cnc_dtsvrdset

     Reads the setting data in the DATA SERVER. If this function is executed while... [read more]    		Fanuc Focas Library | Data | cnc_dtsvrdset

    Fanuc Focas Library | Data | cnc_dtsvsavecram

     Saves the contents of the interface buffer for the DATA SERVER to the file by the name of COMMON.RAM in the hard disk of the DATA SERVER.... [read more]    		Fanuc Focas Library | Data | cnc_dtsvsavecram

    Fanuc Focas Library | Data | cnc_dtsvsetdncpg

     Sets the file name for DNC operation in the DATA SERVER.... [read more]    		Fanuc Focas Library | Data | cnc_dtsvsetdncpg

    Fanuc Focas Library | Data | cnc_dtsvsetmode

     Sets the current mode of the DATA SERVER(storage mode/buffer mode). If the mode of the DATA SERVER is changed, all the data in hard disk of the DATA... [read more]    		Fanuc Focas Library | Data | cnc_dtsvsetmode

    Fanuc Focas Library | Data | cnc_dtsvupdnstat

     The execution result of cnc_dtsvdownload ,... [read more]    		Fanuc Focas Library | Data | cnc_dtsvupdnstat

    Fanuc Focas Library | Data | cnc_dtsvupload

     Orders the CNC to upload the file to the DATA SERVER. Therefore, normal termination of this function shows that uploading the file to the DATA SERVER has been... [read more]    		Fanuc Focas Library | Data | cnc_dtsvupload

    Fanuc Focas Library | Data | cnc_dtsvwrfile

     Transfers file from hard disk on personal computer to DATA SERVER. This function is effective for the DATA SERVER board(10BASE-T), and 16i/18i/21i, 0i.... [read more]    		Fanuc Focas Library | Data | cnc_dtsvwrfile

    Fanuc Focas Library | Data | cnc_dtsvwrset

     Writes the setting data in the DATA SERVER. If this function is executed while... [read more]    		Fanuc Focas Library | Data | cnc_dtsvwrset

    Fanuc Focas Library | Data | cnc_rdcomlogmsg

     Reads logging message for DNC2.... [read more]    		Fanuc Focas Library | Data | cnc_rdcomlogmsg

    Fanuc Focas Library | Data | cnc_rdcomopemsg

     Reads operator's message for DNC1,DNC2.... [read more]    		Fanuc Focas Library | Data | cnc_rdcomopemsg

    Fanuc Focas Library | Data | cnc_rdcomparam

     Reads communication parameters for DNC1, DNC2 or OSI-Ethernet function.... [read more]    		Fanuc Focas Library | Data | cnc_rdcomparam

    Fanuc Focas Library | Data | cnc_rddncfname

     Reads the name of the file in the host computer for DNC operation using DNC1, DNC2 or OSI-Ethernet function.... [read more]    		Fanuc Focas Library | Data | cnc_rddncfname

    Fanuc Focas Library | Data | cnc_rddsdevinfo

     All the number of pages , the use number of pages, the total number of entries, and the numberof use entries are taken out from an ATA... [read more]    		Fanuc Focas Library | Data | cnc_rddsdevinfo

    Fanuc Focas Library | Data | cnc_rddsdir

     DATA SERVER The current folder name of the ATA card of DATA SERVER function is taken out with a full path.... [read more]    		Fanuc Focas Library | Data | cnc_rddsdir

    Fanuc Focas Library | Data | cnc_rddsdncfile

     DATA SERVER The file name set to DNC operation at the time of the Storage mode of DATA SERVER function is taken out with... [read more]    		Fanuc Focas Library | Data | cnc_rddsdncfile

    Fanuc Focas Library | Data | cnc_rddsfile

     DATA SERVER The list of the files in the current folder of DATA SERVER function (a sub folder is included) is taken out.... [read more]    		Fanuc Focas Library | Data | cnc_rddsfile

    Fanuc Focas Library | Data | cnc_rdrcvmsg

     Reads contents of the receive buffer in which received message is stored. When this function is called, receipt status in CNC is... [read more]    		Fanuc Focas Library | Data | cnc_rdrcvmsg

    Fanuc Focas Library | Data | cnc_rdrcvstat

     Obtains receipt status of message for OSI-Ethernet. The receipt status becomes ON when CNC receives a message for OSI-Ethernet, and becomes OFF when... [read more]    		Fanuc Focas Library | Data | cnc_rdrcvstat

    Fanuc Focas Library | Data | cnc_rdsndmsg

     Reads contents of the transmit buffer in which transmitted message is stored.... [read more]    		Fanuc Focas Library | Data | cnc_rdsndmsg

    Fanuc Focas Library | Data | cnc_sendmessage

     Sends message to the host computer.... [read more]    		Fanuc Focas Library | Data | cnc_sendmessage

    Fanuc Focas Library | Data | cnc_wrcomparam

     Writes communication parameters for DNC1,DNC2 or OSI-Ethernet function. When communication parameters are written to OSI-Ethernet board... [read more]    		Fanuc Focas Library | Data | cnc_wrcomparam

    Fanuc Focas Library | Data | cnc_wrdncfname

     Writes the name of the file in the host computer for DNC operation using DNC1, DNC2 or OSI-Ethernet function.... [read more]    		Fanuc Focas Library | Data | cnc_wrdncfname

    Fanuc Focas Library | Data | cnc_wrdsdncfile

     DATA SERVER The file for DNC operation at the time of the storage mode of DATA SERVER function is set up. DATA... [read more]    		Fanuc Focas Library | Data | cnc_wrdsdncfile

    Fanuc Focas Library | Data | ds_cancel

     The execution of the function for the following DATA SERVER is stopped.... [read more]    		Fanuc Focas Library | Data | ds_cancel

    Fanuc Focas Library | Data | ds_checkhdd

     Whether a defective sector exists in the hard disk is checked.... [read more]    		Fanuc Focas Library | Data | ds_checkhdd

    Fanuc Focas Library | Data | ds_chghdddir

     Change the work directory(current directory) of hard disk in the DATA SERVER. This function is available even to Fast Ethernet.... [read more]    		Fanuc Focas Library | Data | ds_chghdddir

    Fanuc Focas Library | Data | ds_copyhddfile

     The file in the hard disk of the DATA SERVER is copied. In this function, the control returns to the application without only requesting the copy of the file... [read more]    		Fanuc Focas Library | Data | ds_copyhddfile

    Fanuc Focas Library | Data | ds_delhdddir

     Delete the directory in the hard disk of the DATA SERVER.... [read more]    		Fanuc Focas Library | Data | ds_delhdddir

    Fanuc Focas Library | Data | ds_delhddfile

     The file in the hard drive of the DATA SERVER is deleted. The some files can be deleted simultaneously by specifying wild-card(*,?). In this function,... [read more]    		Fanuc Focas Library | Data | ds_delhddfile

    Fanuc Focas Library | Data | ds_delhostfile

     Delete the file of host computer. The wild-card(*, ?) cannot be used to specify the name.... [read more]    		Fanuc Focas Library | Data | ds_delhostfile

    Fanuc Focas Library | Data | ds_download

     Outputs data to be registered(downloading). This function is only for Fast Ethernet board. This function is not supported at Embedded... [read more]    		Fanuc Focas Library | Data | ds_download

    Fanuc Focas Library | Data | ds_dwnend

     Notifies the end of downloading data to CNC. (This function must be executed after... [read more]    		Fanuc Focas Library | Data | ds_dwnend

    Fanuc Focas Library | Data | ds_dwnstart

     Requests CNC to start downloading. (This function must be executed before... [read more]    		Fanuc Focas Library | Data | ds_dwnstart

    Fanuc Focas Library | Data | ds_formathdd

     The hard disk is formatted(initialization).... [read more]    		Fanuc Focas Library | Data | ds_formathdd

    Fanuc Focas Library | Data | ds_gethostfile

     The file of the host computer is transferred to the hard disk of the DATA SERVER according to the get command of the FTP.... [read more]    		Fanuc Focas Library | Data | ds_gethostfile

    Fanuc Focas Library | Data | ds_ldelhddfile

     The files in the hard disk of the DATA SERVER are deleted according to the list file. The wild-card(*, ?)... [read more]    		Fanuc Focas Library | Data | ds_ldelhddfile

    Fanuc Focas Library | Data | ds_lgethostfile

     The files in the host computer are transferred to the hard disk of the DATA SERVER by the processing of FTP according to the... [read more]    		Fanuc Focas Library | Data | ds_lgethostfile

    Fanuc Focas Library | Data | ds_lputhddfile

     The files in the hard disk of the DATA SERVER are transferred to the host computer by the processing of FTP according to the... [read more]    		Fanuc Focas Library | Data | ds_lputhddfile

    Fanuc Focas Library | Data | ds_makehdddir

     Make the directory in the hard disk of the DATA SERVER.... [read more]    		Fanuc Focas Library | Data | ds_makehdddir

    Fanuc Focas Library | Data | ds_mgethostfile

     The files of the host computer are transferred to the hard disk of the DATA SERVER according to the mget command of the... [read more]    		Fanuc Focas Library | Data | ds_mgethostfile

    Fanuc Focas Library | Data | ds_mputhddfile

     The files in the hard disk of the DATA SERVER are transferred to the host computer according to the mput command of the... [read more]    		Fanuc Focas Library | Data | ds_mputhddfile

    Fanuc Focas Library | Data | ds_puthddfile

     The file in the hard disk of the DATA SERVER is transferred to the host computer side according to the put command of the FTP. The wild-card(*, ?) cannot... [read more]    		Fanuc Focas Library | Data | ds_puthddfile

    Fanuc Focas Library | Data | ds_rddnchddfile

     The file name which includes the PATH name in the hard disk which is setted for the DNC operation are acquired.... [read more]    		Fanuc Focas Library | Data | ds_rddnchddfile

    Fanuc Focas Library | Data | ds_rddnchostfile

     The connected host number and the file name in host computer for the DNC operation is acquired.... [read more]    		Fanuc Focas Library | Data | ds_rddnchostfile

    Fanuc Focas Library | Data | ds_rdfile

     Transfers file from DATA SERVER to hard disk on personal computer. This function is effective in only 16i/18i/21i. and, this function... [read more]    		Fanuc Focas Library | Data | ds_rdfile

    Fanuc Focas Library | Data | ds_rdhdddir

     Get the file information at each file. The following information is acquired at each file. - File name... [read more]    		Fanuc Focas Library | Data | ds_rdhdddir

    Fanuc Focas Library | Data | ds_rdhddinfo

     Get the information of hard disk of DATA SERVER. The following information can be acquired. - The remainder capacity of hard disk.... [read more]    		Fanuc Focas Library | Data | ds_rdhddinfo

    Fanuc Focas Library | Data | ds_rdhostdir

     Get the file information of host computer.... [read more]    		Fanuc Focas Library | Data | ds_rdhostdir

    Fanuc Focas Library | Data | ds_rdhostdir2

     Get the number of files and file information of login directory on the host computer. Information acquired in... [read more]    		Fanuc Focas Library | Data | ds_rdhostdir2

    Fanuc Focas Library | Data | ds_rdhostinfo

     Get the information of login directory of the host computer. The following information is acquired.... [read more]    		Fanuc Focas Library | Data | ds_rdhostinfo

    Fanuc Focas Library | Data | ds_rdhostno

     Get the host number of the connected host computer.... [read more]    		Fanuc Focas Library | Data | ds_rdhostno

    Fanuc Focas Library | Data | ds_rdm198hdddir

     The work directory for the M198(subprogram call) is acquired.... [read more]    		Fanuc Focas Library | Data | ds_rdm198hdddir

    Fanuc Focas Library | Data | ds_rdm198host

     Connected host number for the M198(subprogram call) is acquired.... [read more]    		Fanuc Focas Library | Data | ds_rdm198host

    Fanuc Focas Library | Data | ds_rdmntinfo

     The data for troubleshooting is acquired as maintenance information for the file transfer between the DATA SERVER and CNC.... [read more]    		Fanuc Focas Library | Data | ds_rdmntinfo

    Fanuc Focas Library | Data | ds_rdmode

     Get the mode for the DATA SERVER.... [read more]    		Fanuc Focas Library | Data | ds_rdmode

    Fanuc Focas Library | Data | ds_rdncfile

     The NC program is inputted from the hard drive to the NC. Storage mode : To CNC memory from hard disk(or ATA) of DATA SERVER... [read more]    		Fanuc Focas Library | Data | ds_rdncfile

    Fanuc Focas Library | Data | ds_rdncfile2

     The NC program is inputted from the hard drive to the NC. Storage mode : To CNC memory from hard disk(or ATA) of DATA SERVER... [read more]    		Fanuc Focas Library | Data | ds_rdncfile2

    Fanuc Focas Library | Data | ds_rdresult

     Get the execution result of the function for the following DATA SERVER.... [read more]    		Fanuc Focas Library | Data | ds_rdresult

    Fanuc Focas Library | Data | ds_renhddfile

     The file name in the hard disk of the DATA SERVER is changed.... [read more]    		Fanuc Focas Library | Data | ds_renhddfile

    Fanuc Focas Library | Data | ds_searchresult

     Gets the result of ds_searchword function.... [read more]    		Fanuc Focas Library | Data | ds_searchresult

    Fanuc Focas Library | Data | ds_searchword

     The string of the NC program in DATA SERVER at the running of M198/DNC in MEM/RMT mode is searched. The result of search can... [read more]    		Fanuc Focas Library | Data | ds_searchword

    Fanuc Focas Library | Data | ds_wrdnchddfile

     The file name in the hard disk of the DATA SERVER for DNC operation is set. The current work directory is... [read more]    		Fanuc Focas Library | Data | ds_wrdnchddfile

    Fanuc Focas Library | Data | ds_wrdnchostfile

     The file name of the host computer for DNC operation is set. The current connected host computer is set... [read more]    		Fanuc Focas Library | Data | ds_wrdnchostfile

    Fanuc Focas Library | Data | ds_wrfile

     Transfers file from hard disk on personal computer to DATA SERVER. This function is effective in only 16i/18i/21i. and, this function... [read more]    		Fanuc Focas Library | Data | ds_wrfile

    Fanuc Focas Library | Data | ds_wrhostno

     The host computer which works the FTP server which becomes the other party of the communication of the DATA SERVER is changed.... [read more]    		Fanuc Focas Library | Data | ds_wrhostno

    Fanuc Focas Library | Data | ds_wrm198hdddir

     The work directory for the M198(subprogram call) is set. The current directory in the hard disk of the... [read more]    		Fanuc Focas Library | Data | ds_wrm198hdddir

    Fanuc Focas Library | Data | ds_wrm198host

     Connected host number for the M198(subprogram call) is set. The connected host of now becomes the host for... [read more]    		Fanuc Focas Library | Data | ds_wrm198host

    Fanuc Focas Library | Data | ds_wrmode

     Set the mode for the DATA SERVER. The mode of the DATA SERVER which can be set is shown as follows.... [read more]    		Fanuc Focas Library | Data | ds_wrmode

    Fanuc Focas Library | Data | etb_rderrmsg

     Get the error message which occurred in the Ethernet board. This function acquires the error message of the Ethernet board... [read more]    		Fanuc Focas Library | Data | etb_rderrmsg

    Fanuc Focas Library | Data | etb_rdparam

     Get the parameter of ethernet board. The following parameter can be acquired by this function.... [read more]    		Fanuc Focas Library | Data | etb_rdparam

    Fanuc Focas Library | Data | etb_wrparam

     Set the parameter for Ethernet board. The following parameter can be set to the Ethernet board. Parameter... [read more]    		Fanuc Focas Library | Data | etb_wrparam

    Fanuc Focas Library | Data | eth_clrlog

     Clear the logs for Ethernet function : Embedded Ethernet[Internal port ,PCMCIA Card], Fast Ethernet board, Fast DATA SERVER board, Windows CE... [read more]    		Fanuc Focas Library | Data | eth_clrlog

    Fanuc Focas Library | Data | eth_dschkdsk

     Check disk of ATA card on DATA SERVER.... [read more]    		Fanuc Focas Library | Data | eth_dschkdsk

    Fanuc Focas Library | Data | eth_dsformat

     Format ATA card on DATA SERVER.... [read more]    		Fanuc Focas Library | Data | eth_dsformat

    Fanuc Focas Library | Data | eth_rddsformat

     Get the format of ATA card on DATA SERVER.... [read more]    		Fanuc Focas Library | Data | eth_rddsformat

    Fanuc Focas Library | Data | eth_rddsm198dir

     Get the work folder for the M198 on DATA SERVER using Strage mode.... [read more]    		Fanuc Focas Library | Data | eth_rddsm198dir

    Fanuc Focas Library | Data | eth_rddsm198host

     Get the connected host number and work folder for the M198 on DATA SERVER using FTP mode.... [read more]    		Fanuc Focas Library | Data | eth_rddsm198host

    Fanuc Focas Library | Data | eth_rddsmode

     Get the all channel modes on DATA SERVER.... [read more]    		Fanuc Focas Library | Data | eth_rddsmode

    Fanuc Focas Library | Data | eth_rddsstate

     Get each path of maintenance information on DATA SERVER.... [read more]    		Fanuc Focas Library | Data | eth_rddsstate

    Fanuc Focas Library | Data | eth_rdhost

     Get the host number selected current Ethernet function.... [read more]    		Fanuc Focas Library | Data | eth_rdhost

    Fanuc Focas Library | Data | eth_rdlog

     MTConnect Fanuc Adapter... [read more]    		Fanuc Focas Library | Data | eth_rdlog

    Fanuc Focas Library | Data | eth_rdparam

     Get the parameters for Ethernet function : Fast Ethernet board, Fast DATA SERVER... [read more]    		Fanuc Focas Library | Data | eth_rdparam

    Fanuc Focas Library | Data | eth_wrdsm198dir

     Set the work folder for the M198 on DATA SERVER using Strage mode.... [read more]    		Fanuc Focas Library | Data | eth_wrdsm198dir

    Fanuc Focas Library | Data | eth_wrdsm198host

     Set the connected host number and work folder for the M198 on DATA SERVER using FTP mode.... [read more]    		Fanuc Focas Library | Data | eth_wrdsm198host

    Fanuc Focas Library | Data | eth_wrdsmode

     Change the mode for DATA SERVER function.... [read more]    		Fanuc Focas Library | Data | eth_wrdsmode

    Fanuc Focas Library | Data | eth_wrhost

     Set the host number selected Ethernet function.... [read more]    		Fanuc Focas Library | Data | eth_wrhost

    Fanuc Focas Library | Data | eth_wrparam

     Sets the parameters for Ethernet function : Fast Ethernet board, Fast DATA SERVER... [read more]    		Fanuc Focas Library | Data | eth_wrparam

    Fanuc Focas Library | Data | flist_Data

     CNC: Function Reference related to data server,DNC1,DNC2,OSI-Ethernet... [read more]    		Fanuc Focas Library | Data | flist_Data
    Modified: 2023-12-05