Description
Reads the number of operation history data.
It is necessary to stop sampling the operation history data by using cnc_stopophis function before this function is used.
(Example)
- Series 15, 16i/18i/21i, 0i-A/B/C, Power Mate i When the operation history screen of CNC displays the following data, this function reads that the number of operation history data equals 6.
- Series 15i, 30i, 0i-D/F, PMi-A When the operation history screen of CNC displays the following data, this function reads that the number of operation history data equals 3.
| Number | Data | Kind |
|---|---|---|
| 1 | 99/11/22 | Power-on time |
| 2 | 12:34:56 | |
| 3 | PS0181 | Alarm |
| 4 | 99/11/22 | |
| 5 | 13:00:00 | |
| 6 | [SOFT 1] | MDI key |
| Number | Data | Kind |
|---|---|---|
| 1 | 99/11/22 | Power-on time |
| 12:34:56 | ||
| 2 | PS0181 | Alarm |
| 99/11/22 | ||
| 13:00:00 | ||
| 3 | [SOFT 1] | MDI key |
Universal Fanuc Driver
Fanuc Focas Library CD
Declaration
Arguments
Specify the library handle. See "Library handle" for details.
Pointer to the variable in which the number of operation history data is stored.
Return
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
| Return code | Meaning/Error handling |
|---|---|
(1) |
|
(6) |
The extended driver/library function are necessary. |
As for the other return codes or the details, see "Return status of Data window function"
CNC option
For HSSB connection,
For Ethernet connection,
The Ethernet function and the extended driver/library function is necessary. However, in case of Series 16i/18i/21i-B, 0i-B/C/D/F, Series 30i and PMi-A, the required CNC option is as follows. When Embedded Ethernet is used,above two optional functions are not required.
When Ethernet board is used,
- only Ethernet function is required.
CNC parameter
This function is related to the following CNC parameter.
See the manual of CNC parameter for details.
0015#3=1 (must be set)
3112#5=0 (must be set)
3112#5=1 (must be set)
CNC mode
This function can be used in any CNC mode.
Available CNC
| 0i-A | 0i-B/C(Note) | 0i-D | 0i-F | 15 | 15i | 16 | 18 | 21 | 16i-A | 18i-A | 21i-A | 16i-B | 18i-B | 21i-B | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M (Machining) | |||||||||||||||||
| T (Turning) | - | ||||||||||||||||
| LC (Loader) | - | - | - | - | - | - | - | - |
| 0i-D | 0i-F | 16i | 18i | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|
| P (Punch press) | - | |||||
| L (Laser) | - | - | - | - | ||
| W (Wire) | - | - |
| Power Mate i-D | |
| Power Mate i-H | |
| Power Motion i-A | O |
| "O" | : | Both Ethernet and HSSB | |
| "E" | : | Ethernet | |
| "H" | : | HSSB | |
| "X" | : | Cannot be used | |
| "-" | : | None |
Note) 0i-C does not support the HSSB function.
See Also
cnc_stopophis cnc_startophis cnc_rdophistry cnc_rdophistry2 cnc_rdophistry4 cnc_clearophis
