CNC_RDLACTNUM | LASER

Specify the library handle. See "Library handle" for details.

Pointer to the ODBLACTN structure including the active cutting number, active piercing number and active slope number. The ODBLACTN structure is as follows.

typedef struct odblactn {
    short   slct;       /* Flag of valid data */
    short   act_proc;   /* Active cutting number */
    short   act_pirce;  /* Active piercing number */
    short   act_slop;   /* Active slope number (Series 30i/31i-LB cannot be used.) */
    short   reserve[5]; /* (reserve) */
} ODBLACTN ;

slct

Flag of valid data is set.

bit 0	:	Active cutting number
bit 1	:	Active piercing number
bit 2	:	Active slope number(Series 30i/31i-LB cannot be used.)
bit 3,..,7	:	(reserve)
bit 8,..,15	:	(not used)

* When a bit is 0, it means the corresponding data has no meaning.

act_proc

Active cutting number is set.

·Series 16i/18i-L

(Output range: 1 to 10, Unit: none)

·Series 30i/31i-LB

When addition of the cutting condition data option is not provided.

(Output range: 1 to 10, Unit: none)

When addition of the cutting condition data option is provided.

(Output range: 1 to 30, Unit: none)

act_price

Active piercing number is set.

·Series 16i/18i-L

(Output range: 101 to 103, Unit: none)

·Series 30i/31i-LB

When addition of the cutting condition data option is not provided.

(Setting range: 101 to 103)

When addition of the cutting condition data option is provided.

(Setting range: 101 to 110)

act_slope

Active slope number is set.

·Series 16i/18i-L

(Output range: 301 to 305, Unit: none)

·Series 30i/31i-LB

Series 30i/31i-LB cannot be used.

reserve

(reserve)