CNC_RDLPSCDPWRCTL | LASER

Specify the library handle. See "Library handle" for details.

The data group number to read is set.

A pointer to the number of data items in power control is set. Specifies the number to read before calling the function. The number which actually read after calling the function is set.

A pointer to the IODBPWRCTL structure in which to return the data group of power control. The IODBPWRCTL structure is as follows.

typedef struct iodbpwrctl {
    short    slct;          /* Flag of valid data                       */
    short    power_min;     /* Minimum peak power                       */
    short    pwr_sp_zr;     /* Peak power at feed rate = 0              */
    short    freq_min;      /* Minimum pulse frequency                  */
    short    freq_sp_zr;    /* Frequency at feed rate = 0               */
    short    duty_min;      /* Minimum pulse duty                       */
    short    duty_sp_zr;    /* Pulse duty at feed rate = 0              */
    char     feed_r_dec;    /* Decimals places                          */
    char     reserve;       /* (reserve)                                */
    long     feed_r;        /* Allowable width of feed rate fluctuation */
    short    reserves[7];   /* (reserve)                                */
} IODBPWRCTL ;

slct

Flag of valid data is set.

bit 0	:	Minimum peak power
bit 1	:	Peak power at feed rate = 0
bit 2	:	Minimum pulse frequency
bit 3	:	Frequency at feed rate = 0
bit 4	:	Minimum pulse duty
bit 5	:	Pulse duty at feed rate = 0
bit 6	:	Allowable width of feed rate fluctuation
bit 7,..,15	:	(reserve)

* When a bit is 0, it means the corresponding data hasno meaning.

power_min

The minimum peak power (clamp value) is set.

(Setting range:0 to 9999,Unit:W)

pwr_sp_zr

The peak power at feed rate = 0 is set.

(Setting range:0 to 9999,Unit:W)

freq_min

The minimum pulse frequency is set.

(Setting range:1 to 32767,Unit:Hz)

freq_sp_zr

The pulse frequency at feed rate = 0 is set.

(Setting range:1 to 32767,Unit:Hz)

duty_min

The minimum pulse duty is set.

(Setting range:0 to 100,Unit:%)

duty_sp_zr

The pulse duty at feed rate = 0 is set.

(Setting range:0 to 100,Unit:%)

feed_r_dec

The number of decimals places at allowable width of feed rate fluctuation is set.

(Setting range:0 to 9)

The corresponding data is as follows.

decimals places	corresponding data
feed_r_dec	feed_r

reserve

(reserve)

feed_r

The allowable width of feed rate fluctuation is set.

(Setting range:0 to 999999999,Unit:mm?inch(input unit))

reserves

(reserve)