CNC_WRLAGSLT | LASER

Specify the library handle. See "Library handle" for details.

Pointer to the IODBLAGSL structure including the assist gas selection of laser setting data. The IODBLAGSL structure is as follows.

·Series 16i/18i-L
typedef struct iodblagsl {
    short   slct;       /* Flag of data selection */
    short   ag_slt;     /* Assist gas selection */
    short   agflow_slt; /* Assist gas flow selection */
    short   reserve[6]; /* (reserve) */
} IODBLAGSL ;
·Series 30i/31i-LB
typedef struct iodblagsl {
    short   slct;       /* FFlag of data selection           */
    short   ag_slt;     /* Assist gas selection              */
    short   agflow_slt; /* Series 30i/31i-LB cannot be used. */
    short   ag_press;   /* Assist gas pressure               */
    short   ag_ready_t; /* Gas setting time                  */
    short   reserve[4]; /* (reserve)                         */
} IODBLAGSL ;

slct

Specify flag of data selection.

·Series 16i/18i-L

bit 0	:	Assist gas selection
bit 1	:	Assist gas flow selection
bit 2,..,7	:	(reserve)
bit 8,..,15	:	(not used)

·Series 30i/31i-LB

bit0	:	Assist gas selection
bit1	:	Series 30i/31i-LB cannot be used.
bit2	:	Assist gas pressure
bit3	:	Gas setting time
bit 4,..,15	:	(not used)

* In order to write the data to CNC, turn on the corresponding bit on this data.

ag_slt

Specify assist gas selection.

agflow_slt

Series 16i/18i-L

Specify assist gas flow selection.

Series 30i/31i-LB

Series 30i/31i-LB cannot be used.

ag_press

·Series 30i/31i-LB only

Specify Assist gas pressure.

It corresponds to parameter No.15136.

ag_ready_t

·Series 30i/31i-LB only

Specify Gas setting time.

It corresponds to parameter No.15135.

reserve

(reserve)