Description
Writes the laser power for contouring.
Universal Fanuc Driver
Fanuc Focas Library CD
Declaration
Arguments
Specify the library handle. See "Library handle" for details.
Pointer to the IODBLEGPR structure including the laser power for contouring. The IODBLEGPR structure is as follows.
typedef struct iodblegpr {
short slct; /* Flag of data selection */
short power; /* Peak power */
short freq; /* Pulse frequency */
short duty; /* Pulse duty */
short reserve[5]; /* (reserve) */
} IODBLEGPR ;
- slct
- Specify flag of data selection.
bit 0 : Peak power bit 1 : Pulse frequency bit 2 : Pulse duty bit 3,..,7 : (reserve) bit 8,..,15 : (not used) - * In order to write the data to CNC, turn on the corresponding bit on this data.
- power
- Specify peak power.
- freq
- Specify pulse frequency.
- duty
- Specify pulse duty.
- reserve
- (reserve)
Return
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
| Return code | Meaning/Error handling | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
(1) |
This function cannot be used except 16i/18i-L, 30i/31i-LB. |
|||||||||
(5) |
The laser power for contouring is wrong. In order to get more information for this err_no return value, execute cnc_getdtailerrfunction. The following details status will be set onto the member, err_no of ODBERR structure.
|
|||||||||
(6) |
The extended driver/library function is necessary. |
|||||||||
(9) |
Mistake of laser oscillator (parameter No.15030) |
As for the other return codes or the details, see "Return status of Data window function"
CNC option
For HSSB connection,
For Ethernet connection,
The Ethernet function and the extended driver/library function are necessary. When Embedded Ethernet is used,above two optional functions are not required.
When Ethernet board is used,
- only Ethernet function is required.
CNC parameter
This function is related to the following CNC parameter.
See the manual of CNC parameter for details.
CNC mode
This function can be used in any CNC mode.
Available CNC
| 0i-A | 0i-B/C(Note) | 0i-D | 0i-F | 15 | 15i | 16 | 18 | 21 | 16i-A | 18i-A | 21i-A | 16i-B | 18i-B | 21i-B | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M (Machining) | |||||||||||||||||
| T (Turning) | - | ||||||||||||||||
| LC (Loader) | - | - | - | - | - | - | - | - |
| 0i-D | 0i-F | 16i | 18i | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|
| P (Punch press) | - | |||||
| L (Laser) | - | - | - | - | ||
| W (Wire) | - | - |
| Power Mate i-D | |
| Power Mate i-H | |
| Power Motion i-A | - |
| "O" | : | Both Ethernet and HSSB | |
| "E" | : | Ethernet | |
| "H" | : | HSSB | |
| "X" | : | Cannot be used | |
| "-" | : | None |
Note) 0i-C does not support the HSSB function.
See Also
