Description
Writes the duty data for power control.
Universal Fanuc Driver
Fanuc Focas Library CD
Declaration
Arguments
Specify the library handle. See "Library handle" for details.
Pointer to the IODBLPWDT structure including the duty data for power control. The IODBLPWDT structure is as follows.
typedef struct iodblpwdt {
short slct; /* Flag of data selection */
short dty_const; /* Constant of duty for power control (Series 30i/31i-LB cannot be used.) */
short dty_min; /* Minimum duty for power control */
short reserve[6];/* (reserve) */
} IODBLPWDT ;
- slct
- Flag of data selection must be set.
bit0 : Constant of duty for power control (Series 30i/31i-LB cannot be used.) bit1 : Minimum duty for power control bit 2,..,7 : (reserve) bit 8,..,15 : (not used) - * In order to write the data to CNC, turn on the corresponding bit on this data.
- dty_const
- Specify constant of duty for power control. (Series 30i/31i-LB cannot be used.)
- dty_min
- Specify minimum duty for power control.
- reserve
- (reserve)
Return
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
| Return code | Meaning/Error handling | ||||||
|---|---|---|---|---|---|---|---|
(1) |
This function cannot be used except 16i/18i-L, 30i/31i-LB. |
||||||
(5) |
The duty data for power control is wrong. In order to get more information for this err_no return value, execute cnc_getdtailerr function. The following details status will be set onto the member, err_no of ODBERR structure.
|
||||||
(6) |
The extended driver/library function is necessary. |
||||||
(9) |
Mistake of laser oscillator (parameter No.15030) |
As for the other return codes or the details, see "Return status of Data window function"
CNC option
For HSSB connection,
For Ethernet connection,
The Ethernet function and the extended driver/library function are necessary. When Embedded Ethernet is used,above two optional functions are not required.
When Ethernet board is used,
- only Ethernet function is required.
CNC parameter
This function is related to the following CNC parameter.
See the manual of CNC parameter for details.
CNC mode
This function can be used in any CNC mode.
Available CNC
| 0i-A | 0i-B/C(Note) | 0i-D | 0i-F | 15 | 15i | 16 | 18 | 21 | 16i-A | 18i-A | 21i-A | 16i-B | 18i-B | 21i-B | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M (Machining) | |||||||||||||||||
| T (Turning) | - | ||||||||||||||||
| LC (Loader) | - | - | - | - | - | - | - | - |
| 0i-D | 0i-F | 16i | 18i | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|
| P (Punch press) | - | |||||
| L (Laser) | - | - | - | - | ||
| W (Wire) | - | - |
| Power Mate i-D | |
| Power Mate i-H | |
| Power Motion i-A | - |
| "O" | : | Both Ethernet and HSSB | |
| "E" | : | Ethernet | |
| "H" | : | HSSB | |
| "X" | : | Cannot be used | |
| "-" | : | None |
Note) 0i-C does not support the HSSB function.
See Also
