CNC_WRPSCDPROC | LASER

Specify the library handle. See "Library handle" for details.

Specify the start cutting data group number.

·Series 16i/18i-L

·Series 30i/31i-LB

When addition of the cutting condition data option is not provided.

When addition of the cutting condition data option is provided.

Pointer to the number of cutting data. Specify the number of cutting data to be written before function call, and the number of cutting data being written actually is stored after the function call.

Pointer to the IODBPSCD structure including the cutting data of the cutting condition file. The IODBPSCD structure is as follows.

·Series 16i/18i-L
typedef struct iodbpscd {
    short   slct;       /* Flag of data selection */
    long    feed;       /* Feedrate */
    short   power;      /* Cutting peak power */
    short   freq;       /* Cutting frequency */
    short   duty;       /* Cutting duty */
    short   g_press;    /* Assist gas pressure */
    short   g_kind;     /* Assist gas select */
    short   g_ready_t;  /* Assist gas setting time */
    short   displace;   /* Reference displace */
    long    supple;     /* Beam radius offset */
    short   edge_slt;   /* Edge cutting select */
    short   appr_slt;   /* Start-up select */
    short   pwr_ctrl;   /* Power control */
    short   reserve[4]; /* (reserve) */
} IODBPSCD ;
·Series 30i/31i-LB
typedef struct iodbpscd {
    short   slct;       /* Flag of data selection   */
    long    feed;       /* Feedrate                 */
    short   power;      /* Cutting peak power       */
    short   freq;       /* Cutting frequency        */
    short   duty;       /* Cutting duty             */
    short   g_press;    /* Assist gas pressure      */
    short   g_kind;     /* Assist gas select        */
    short   g_ready_t;  /* Gas setting time         */
    short   displace;   /* Reference displace       */
    long    supple;     /* Beam radius offset       */
    short   edge_slt;   /* Edge cutting select      */
    short   appr_slt;   /* Start-up select          */
    short   pwr_ctrl;   /* Power control            */
    long    displace2;  /* Reference displace       */
    char    gap_axis;   /* Gap control axis         */
    char    feed_dec;   /* Decimals places          */
    char    supple_dec; /* Decimals places          */
    char    dsp2_dec;   /* Decimals places          */
} IODBPSCD ;

slct

Flag of data selection must be set.

·Series 16i/18i-L

bit 0	:	Feedrate
bit 1	:	Cutting peak power
bit 2	:	Cutting frequency
bit 3	:	Cutting duty
bit 4	:	Assist gas pressure
bit 5	:	Assist gas select
bit 6	:	Assist gas setting time
bit 7	:	Reference displace
bit 8	:	Beam radius offset
bit 9	:	Edge cutting select
bit10	:	Start-up select
bit11	:	Power control
bit12,..,15	:	(reserve)

·Series 30i/31i-LB

bit 0	:	Feedrate
bit 1	:	Cutting peak power
bit 2	:	Cutting frequency
bit 3	:	Cutting duty
bit 4	:	Assist gas pressure
bit 5	:	Assist gas select
bit 6	:	Gas setting time
bit 7	:	Reference displace
bit 8	:	Beam radius offset
bit 9	:	Edge cutting select
bit10	:	Start-up select
bit11	:	Power control
bit12	:	Reference displace2
bit13	:	Gap control axis
bit14,..,15	:	(reserve)

* In order to write the data to CNC, turn on the corresponding bit on this data.

feed

Specify feedrate.

·Series 16i/18i-L

(Setting range: 0 to 240000, Unit: mm/min)

·Series 30i/31i-LB

(Setting range: 0 to 999999999, Unit:mm/min, inch/min((input unit)))

power

Specify cutting peak power for contouring.

(Setting range: 0 to 9999, Unit: W)

freq

Specify cutting frequency for contouring.

·Series 16i/18i-L

(Setting range: 5 to 2000, Unit: Hz)

·Series 30i/31i-LB

(Setting range: 1 to 32767, Unit:Hz)

duty

Specify cutting duty for contouring.

(Setting range: 0 to 100, Unit: %)

g_press

Specify assist gas pressure.

·Series 16i/18i-L

(Setting range: 0 to 255, Unit: 0.1Kg/cm2)

·Series 30i/31i-LB

(Setting range: 0 to 9999, Unit: 0.01MPa, 0.1Kg/cm2)

g_kind

Specify assist gas select.

·Series 16i/18i-L

(Setting range: 1 to 7, Unit: kind)

·Series 30i/31i-LB

(Setting range: 1 to 15, Unit: kind)

g_ready_t

Specify assist gas setting time.

(Setting range: 0 to 99, Unit: 0.1second)

displace

Specify reference displace.

(Setting range: -32767 to 32767, Unit: 0.001mm)

supple

Specify beam radius offset.

·Series 16i/18i-L

(Setting range: -9999 to 9999, Unit: 0.001mm)

·Series 30i/31i-LB

(Setting range: -999999999 to 999999999, Unit: mm, inch(input unit))

edge_slt

Specify edge cutting select.

·Series 16i/18i-L

(Setting range: 0, 201 to 205)

·Series 30i/31i-LB

When addition of the cutting condition data option is not provided.

(Setting range: 0, 201 to 205)

When addition of the cutting condition data option is provided.

(Setting range: 0, 201 to 210)

appr_slt

Specify start-up select.

·Series 16i/18i-L

(Setting range: 0, 201 to 205)

·Series 30i/31i-LB

When addition of the cutting condition data option is not provided.

(Setting range: 0, 201 to 205)

When addition of the cutting condition data option is provided.

(Setting range: 0, 201 to 210)

pwr_ctrl

Specify power control.

(Setting range: 0, 901 to 910)

displace2

·Series 30i/31i-LB only

Specify Reference displace 2 .

(Setting range: -999999999 to 999999999, Unit: mm, inch(input unit))

gap_axis

·Series 30i/31i-LB only

You cannot set the gap control axis even if you specified it.

feed_dec

·Series 30i/31i-LB only

Specify decimals places in command value of feed rate.

(Setting range: 0 to 9)

supple_dec

·Series 30i/31i-LB only

Specify decimals places of beam diameter correction amount.

(Setting range: 0 to 9)

dsp2_dec

·Series 30i/31i-LB only

Specify decimals places in standard displacement.

(Setting range: 0 to 9)

The corresponding data is as follows.

decimals places	corresponding data
feed_dec	feed
supple_dec	supple
dsp2_dec	displace2

reserve

·Series 16i/18i-L only

(reserve)