Description
Reads the maximum valid figures and the number of decimal places under the input/output unit, which is related to various data of CNC.
The value which is read by the window library is binary data under the unit of the CNC side. Therefore, it is nesessary to display a decimal point, etc. in consideration of the unit.
Universal Fanuc Driver
Fanuc Focas Library CD
Declaration
Arguments
Specify the library handle. See "Library handle" for details.
| 0 | : | axis type data |
| 1 | : | tool offset |
| 2 | : | custom macro |
| 3 | : | work zero offset (only for Series 16i-W/18i-W)(axis type data). Specify "data_type = 0" excluding Series 16i-W/18i-W. |
| 4 | : | cutting feedrate (only for Series 16i-W/18i-W) |
Specify the address of the variable to store the maximum valid figures.
Specify the address of the array to store the number of decimal places under the input unit. The number of array must be equal to the number of maximum controlled axis. (Except axis type data, only the top of array is valid.)
Specify the address of the array to store the number of decimal places under the output unit. The number of array must be equal to the number of maximum controlled axis. (Except axis type data, only the top of array is valid.)
Return
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
| Return code | Meaning/Error handling |
|---|---|
(4) |
Kind of data (data_type) is wrong. |
(6) |
The extended driver/library function is necessary. |
As for the other return codes or the details, see "Return status of Data window function"
CNC option
And this function is related to the following CNC option.
- Series 15/15i inch/mm conversion function(influenced by setting)
- Series 16/18/21, 16i/18i/21i, 30i, 0i inch/mm conversion function (influenced by setting)
- Power Mate i None
increment system D function
increment system E function
special jig grinder function
increment system 1/10 function
For HSSB connection,
For Ethernet connection,
The Ethernet function and the extended driver/library function are necessary. However, in case of Series 16i/18i/21i-B, 0i-B/C/D/F, the required CNC option is as follows. When Embedded Ethernet is used, above two optional functions are not required. When Ethernet board is used, only Ethernet function is required.
CNC parameter
This function is related to the following CNC parameter.
See the manual of CNC parameter for details.
1004#0,#1,#3,#4,#5, 1009#1
6002#0,#1, 6004#0, 6007#0
1012#0,#1,#2,#3
6002#0,#1, 6004#0, 6007#0
1006#0
1013#0,#1,#2,#3
5042#0,#1,#2,#3
1004#0,#1, 1006#0
1006#0
1013#0,#1
5042#0,#1
1006#0, 1403#0, 3401#3
1006#0
1004#0(Power Mate i-H)
1004#1(Power Mate i-D)
CNC mode
This function can be used in any CNC mode.
Available CNC
| 0i-A | 0i-B/C(Note) | 0i-D | 0i-F | 15 | 15i | 16 | 18 | 21 | 16i-A | 18i-A | 21i-A | 16i-B | 18i-B | 21i-B | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M (Machining) | |||||||||||||||||
| T (Turning) | - | ||||||||||||||||
| LC (Loader) | - | - | - | - | - | - | - | - |
| 0i-D | 0i-F | 16i | 18i | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|
| P (Punch press) | - | |||||
| L (Laser) | - | - | - | - | ||
| W (Wire) | - | - |
| Power Mate i-D | |
| Power Mate i-H | |
| Power Motion i-A | O |
| "O" | : | Both Ethernet and HSSB | |
| "E" | : | Ethernet | |
| "H" | : | HSSB | |
| "X" | : | Cannot be used | |
| "-" | : | None |
Note) 0i-C does not support the HSSB function.
