CNC_WROPNLGSNAME | MISC

Specify the library handle. See "Library handle" for details.

Pointer to the IODBRDNA structure to set the general signal name of software operator's panel.

typedef struct iodbrdna {
     short  datano;         /* Not used */
     short  type;           /* Data select flag */
     char   sgnl1_name[9];  /* General signal name 1 (ASCII) */
     char   sgnl2_name[9];  /* General signal name 2 (ASCII) */
     char   sgnl3_name[9];  /* General signal name 3 (ASCII) */
     char   sgnl4_name[9];  /* General signal name 4 (ASCII) */
     char   sgnl5_name[9];  /* General signal name 5 (ASCII) */
     char   sgnl6_name[9];  /* General signal name 6 (ASCII) */
     char   sgnl7_name[9];  /* General signal name 7 (ASCII) */
     char   sgnl8_name[9];  /* General signal name 8 (ASCII) */
} IODBRDNA ;

datano

Not used.

type

Specify the selection flag.

bit 0	:	General-purpose signal 1
bit 1	:	General-purpose signal 2
bit 2	:	General-purpose signal 3
bit 3	:	General-purpose signal 4
bit 4	:	General-purpose signal 5
bit 5	:	General-purpose signal 6
bit 6	:	General-purpose signal 7
bit 7	:	General-purpose signal 8

• * Bit 8 to 15 is not used.
• * When the bit corresponding to the signal is set to 0, that signal is not written. To write the signal, set the corresponding bit to 1.

sgnl1_name

Specify the general signal name 1 (ASCII).

sgnl2_name

Specify the general signal name 2 (ASCII).

sgnl3_name

Specify the general signal name 3 (ASCII).

sgnl4_name

Specify the general signal name 4 (ASCII).

sgnl5_name

Specify the general signal name 5 (ASCII).

sgnl6_name

Specify the general signal name 6 (ASCII).

sgnl7_name

Specify the general signal name 7 (ASCII).

sgnl8_name

Specify the general signal name 8 (ASCII).

Eight characters from the top of each name (sgnl?_name[0] - sgnl?_name[7]) is set by CNC.