CNC_RDBTOFSINFO | NCDATA

Description

Declaration

Arguments

typedef struct  odbbtlinf {
        short   ofs_type;       /* memory type          */
        short   use_no;         /* available number     */
        short   sub_no;         /* aux. function number */
} ODBBTLINF ;

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

As for the other return codes or the details, see "Return status of Data window function"

CNC option

This function need the following CNC option.

This function needs the B axis control option.

And this function is related to the following CNC option.

• Series 16/18, 16i/18i/21i

Tool geometry/wear compensation

For HSSB connection,

The extended driver/library function is necessary.

For Ethernet connection,

The Ethernet function and the extended driver/library function are necessary.

However, in case of Series 16i/18i/21i-B, the required CNC option is as follows.

When Embedded Ethernet is used,

above two optional functions are not required.

When Ethernet board is used,

only Ethernet function is required.

CNC parameter

This function is related to the following CNC parameter.
See the manual of CNC parameter for details.

• Series 16/18, 16i/18i/21i

8257

CNC mode

This function can be used in any CNC mode.

Available CNC

Note) 0i-C does not support the HSSB function.

See Also

cnc_rdbtofsr   cnc_wrbtofsr