CNC_RDINTCHK | NCDATA

Description

Declaration

Arguments

Specify the data block length(size of IODBINT structure).

(8+4*(number of coordinate)*(number of data))

T series

IODBINT

1 coordinate	all coordinate

K : Number of data to be read

M series

IODBINT

1 coordinate	all coordinate

typedef struct  iodbint {
        short   datano_s;       /* start data number */
        short   type;           /* coordinate type   */
        short   datano_e;       /* end data number   */
        long    data[8*K];      /* coordinate value  */
} IODBINT ;     /* K : number of data to be read     */

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

As for the other return codes or the details, see "Return status of Data window function"

CNC option

This function need the following CNC option.

This function also needs the tool post interference check option (T series) or the multi-path interference check option (M series).

And this function is related to the following CNC option.

• Series 15
T series Tool offset extension (16)/32/80 sets(each path)


• Series 16/18, 16i/18i, 0i-F, 30i
T series Tool offset extension (16)/32/64 sets(each path)

* () : Basic

For HSSB connection,

The extended driver/library function is necessary.

For Ethernet connection,

The Ethernet function and the extended driver/library function are necessary.

However, in case of Series 16i/18i-B, 0i-F and 30i, the required CNC option is as follows.

When Embedded Ethernet is used,

above two optional functions are not required.

When Ethernet board is used,

only Ethernet function is required.

CNC parameter

This function is related to the following CNC parameter.
See the manual of CNC parameter for details.

• Series 15
7605#0,#1,#2,#3,#4,#7
7682,7683
1004#0,#1,#5, 1009#1


• Series 16/18, 16i/18i, 0i-F, 30i
8140#0,#1,#2,#3,#4,#5
8151,8152
8141,..,8149
0000#2, 1004#1

CNC mode

This function can be used in any CNC mode.

Available CNC

Note) 0i-C does not support the HSSB function.

See Also

cnc_wrintchk   cnc_rdintinfo