CNC_WRMGRPDATA | NCDATA

Description

Declaration

Arguments

typedef struct idbmgrp {
    short   s_no;
    short   dummy;
    short   num;
    short   group[N];
} IDBMGRP;
/* N stands for the number of M code group data being written.(Maximum 500) */

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

As for the other return codes or the details, see "Return status of Data window function"

CNC option

And this function is related to the following CNC option.

This function needs the M code group option.

For HSSB connection,

The extended driver/library function is necessary.

For Ethernet connection,

The Ethernet function and the extended driver/library function are necessary.

However, in case of Series 16i/18i-B, 0i-F and 30i, the required CNC option is as follows.

When Embedded Ethernet is used,

above two optional functions are not required.

When Ethernet board is used,

only Ethernet function is required.

CNC parameter

This function is related to the following CNC parameter.
See the manual of CNC parameter for details.

• Series 15
8000#0=1


• Series 16/18
8900#0=1

CNC mode

It is possible to use in MDI mode.

Available CNC

Note) 0i-C does not support the HSSB function.

See Also

cnc_rdmgrpdata