PMC_RDPRMSTART | PMC

Description

Starts uploading the PMC parameter(timer, counter, keep relay, and data) of the tape format.

To uploading of PMC parameter, this function, pmc_rdpmcparam and pmc_rdprmend is used.
The procedure of uploading the PMC parameter is shown as follows.

*	Upload the PMC parameter repeatedly until the return value of pmc_rdpmcparam becomes excepting EW_OK. When all data is uploaded, EW_RESET is returned as a return value.
*	Judge final result of the uploading of PMC parameter from the return value of pmc_rdprmend
*	In case of 0i-F, 30i/31i/32i, please beforehand select the PMC unit type which becomes the object by pmc_select_pmc_unit.

When you execute this function, change the CNC mode to EDIT. MTConnect Fanuc Adapter

Universal Fanuc Driver

Fanuc Focas Library CD

Declaration

#include "fwlib32.h" or "fwlib64.h"

FWLIBAPI short WINAPI pmc_rdprmstart(unsigned short FlibHndl);

Arguments : HSSB

FlibHndl [ in ]

Specify the library handle.
See "Library handle" for details.

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

Return code	Meaning/Error handling
EW_BUSY (-1)	Busy pmc_rdprmstart or pmc_wrprmstart function has been already executed.
EW_NOOPT (6)	no option

As for the other return codes or the details, see "Return status of Data window function"

CNC option

For HSSB connection,

The extended driver/library function is necessary.

CNC parameter

This function is not related to CNC parameter.

CNC mode

It is possible to use in EDIT mode.

Available CNC

	0i-A	0i-B/C(Note)	0i-D	0i-F	15	15i	16	18	21	16i-A	18i-A	21i-A	16i-B	18i-B	21i-B	30i-A	30i-B
M (Machining)	X	X	O	O	X	X	X	X	X	H	H	H	H	H	H	H	O
T (Turning)	X	X	O	O	X	-	X	X	X	H	H	H	H	H	H	H	O
LC (Loader)	-	-	-	-	-	-	X	X	X	H	H	H	H	H	H	-	-

	0i-D	0i-F	16i	18i	30i-A	30i-B
P (Punch press)	H	H	H	H	-	H
L (Laser)	-	-	H	-	-	H
W (Wire)	-	-	X	X	X	X

Power Mate i-D	X
Power Mate i-H	X
Power Motion i-A	X

	"O"	:	Both Ethernet and HSSB
	"E"	:	Ethernet
	"H"	:	HSSB
	"X"	:	Cannot be used
	"-"	:	None

Note) 0i-C does not support the HSSB function.

See Also

pmc_rdpmcparam pmc_rdprmend pmc_wrprmstart pmc_wrpmcparam pmc_wrprmend

Privacy notice

This website uses cookies. By continuing to use it you agree to our privacy policy.

https://www.inventcom.net/fanuc-focas-library/pmc/pmc_rdprmstart

Fanuc Focas Library | Pmc | flist_Pmc

PMC: Function related to PMC... [read more]

Fanuc Focas Library | Pmc | pmc_crdmsg

Reads the data of 32 bytes transmitted from the PMC. It is necessary to transmit the data on the PMC side to read the... [read more]

Fanuc Focas Library | Pmc | pmc_cwrmsg

Writes the data of 32 bytes transmitted to the PMC. It is necessary to receive the data on the PMC side to write the... [read more]

Fanuc Focas Library | Pmc | pmc_getdtailerr

Gets the detailed error information after the function has been executed. The detailed error information is stored in err_no, err_dtno of... [read more]

Fanuc Focas Library | Pmc | pmc_get_current_pmc_unit

Get the current PMC unit type.... [read more]

Fanuc Focas Library | Pmc | pmc_get_number_of_pmc

Reads the number of existing PMC paths (i.e. number of unit).... [read more]

Fanuc Focas Library | Pmc | pmc_get_pmc_unit_types

Reads the PMC system information that shows what kind of PMC units compose the multi-path PMC system.... [read more]

Fanuc Focas Library | Pmc | pmc_get_timer_type

Reads the PMC timer type of the specified timer number.... [read more]

Fanuc Focas Library | Pmc | pmc_kpmsiz

Reads the maximum size of the extended backup memory.... [read more]

Fanuc Focas Library | Pmc | pmc_rdalmmsg

Reads the alarm messages from PMC.... [read more]

Fanuc Focas Library | Pmc | pmc_rdcntldata

Reads the control data to manage PMC data table (address D). This function is not available at PMC-NA. Refer to the programming... [read more]

Fanuc Focas Library | Pmc | pmc_rdcntlgrp

Reads the total number of groups of the control data to manage PMC data table(address D). This function is not available at PMC-NA.... [read more]

Fanuc Focas Library | Pmc | pmc_rdkpm

Reads the contents of the extended backup memory of PMC specified by offset, length. The data are stored in data... [read more]

Fanuc Focas Library | Pmc | pmc_rdkpm2

Reads the contents of the extended backup memory of PMC specified by offset, length. The data are stored in data... [read more]

Fanuc Focas Library | Pmc | pmc_rdmsg

Reads the data of 32 bytes transmitted from the PMC. It is necessary to transmit the data on the PMC side to read the... [read more]

Fanuc Focas Library | Pmc | pmc_rdpmcinfo

Reads the data information about the attribute of each kind of PMC, the effective range of PMC address, etc.... [read more]

Fanuc Focas Library | Pmc | pmc_rdpmcparam

The PMC parameter(timer, counter, keep relay, and data) is uploaded by the tape format. When you execute this function, change to... [read more]

Fanuc Focas Library | Pmc | pmc_rdpmcrng

Reads the PMC data of the specified PMC address/range. This function is used to exchange the data between the... [read more]

Fanuc Focas Library | Pmc | pmc_rdpmctitle

Reads the PMC title data from PMC. When this function is executed while editing the title data with PMC, the return value... [read more]

Fanuc Focas Library | Pmc | pmc_rdprmend

End of upload of the PMC parameter(timer, counter, keep relay, and data) by the tape format. This function is executable other... [read more]

Fanuc Focas Library | Pmc | pmc_select_pmc_unit

Selects PMC that will be the target of other PMC FOCAS2 function by the unit type.... [read more]

Fanuc Focas Library | Pmc | pmc_set_timer_type

Writes the PMC timer type of the specified timer number.... [read more]

Fanuc Focas Library | Pmc | pmc_wrcntldata

Writes the control data to manage PMC data table (address D). This function is not available at PMC-NA. Refer to the programming... [read more]

Fanuc Focas Library | Pmc | pmc_wrcntlgrp

Writes the total number of groups of the control data to manage PMC data table(address D). This function is not available at PMC-NA.... [read more]

Fanuc Focas Library | Pmc | pmc_wrkpm

Writes the data to the extended backup memory of PMC specified by offset, length. The data must be stored in data as... [read more]

Fanuc Focas Library | Pmc | pmc_wrkpm2

Writes the data to the extended backup memory of PMC specified by offset, length. The data must be stored in data as... [read more]

Fanuc Focas Library | Pmc | pmc_wrmsg

Writes the data of 32 bytes transmitted to the PMC. It is necessary to receive the data on the PMC side to write the... [read more]

Fanuc Focas Library | Pmc | pmc_wrpmcparam

The PMC parameter(timer, counter, keep relay, and data) is downloaded by the tape format. When you execute this function, set... [read more]

Fanuc Focas Library | Pmc | pmc_wrpmcrng

Writes the PMC data of the specified PMC address/range. This function is used to exchange the data between the... [read more]

Fanuc Focas Library | Pmc | pmc_wrprmend

End of download of the PMC parameter(timer, counter, keep relay, and data) by the tape format. Even if the PWE of CNC parameter is... [read more]

Fanuc Focas Library | Pmc | pmc_wrprmstart

Starts downloading the PMC parameter(timer, counter, keep relay, and data) of the tape format. To downloading of PMC parameter,... [read more]

Modified: 2023-12-05