CNC_RELATIVE2 | POSITION

Description

Declaration

Arguments

Specify the length of the data block(size of ODBAXIS structure)

ODBAXIS

for each axis	for all axes

• Series 15/15i, 30i, 0i-D/F, PMi-A

n = Maximum controlled axes
(The data for current controlled axes are valid)

• Series 16/18/21, 16i/18i/21i, 0i-A/B/C, Power Mate i

n = Current controlled axes

typedef struct odbaxis {
    short   dummy ;           /* Not used. */
    short   type ;            /* Axis number. */
    long    data[MAX_AXIS] ;  /* Relative position data of controlled axis. */
} ODBAXIS ;               /* MAX_AXIS is the maximum controlled axes. */

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

As for the other return codes or the details, see "Return status of Data window function"

CNC option

For HSSB connection,

The extended driver/library function is necessary.

For Ethernet connection,

The Ethernet function and the extended driver/library function are necessary.

However, in case of Series 16i/18i/21i-B, 0i-B/C/D/F, Series 30i and PMi-A, the required CNC option is as follows.

When Embedded Ethernet is used,

above two optional functions are not required.

When Ethernet board is used,

only Ethernet function is required.

CNC parameter

This function is related to the following CNC parameter.
See the manual of CNC parameter for details.

• Series 15

2204#1=1, 7613#0=1 (must be set)
M series 2202#2,#3,#4,#5 (influenced by setting)
T series 2202#4,#5, 2203#3 (influenced by setting)

• Series 15i

2202#2,#3,#4,#5 (influenced by setting)

• Series 16/18/21, 16i/18i/21i, 0i, 30i, PowerMate i, PMi-A

3104#4,#5 (influenced by setting)

CNC mode

This function can be used in any CNC mode.

Available CNC

Note) 0i-C does not support the HSSB function.

See Also

cnc_relative