Description
Writes the indication address for communication mode of master function.
When the parameters are changed, the restart of CNC is required for putting the change into effect.
This function is only for 6558 Series.
* Please refer to "PROFIBUS-DP function manual" for details of the PROFIBUS-DP function.
Universal Fanuc Driver
Fanuc Focas Library CD
Declaration
Arguments
Specify the library handle. See "Library handle" for details.
Pointer to the IODBINDEADR structure including the indication address of master function.
The IODBINDEADR structure is as follows.
typedef struct {
unsigned char dummy ;
char indi_type ;
unsigned short indi_addr ;
} IODBINDEADR ;
- indi_type
- Specify the kind of the PMC address used as a indication address with ASCII CODE.
- indi_addr
- Specify the top number of the PMC address used as a indication address.
- When you want to initialize this data, please set "0xFFFF".
Return
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
| Return code | Meaning/Error handling | ||||||
|---|---|---|---|---|---|---|---|
(5) |
The specification of the address allocation is wrong. In order to get more information for this err_no return value, execute pmc_getdtailerr function. The following details status will be set onto the member, err_no of ODBPMCERR structure.
|
||||||
(6) |
As for the other return codes or the details, see "Return status of Data window function"
CNC option
This function need the following CNC option.
For HSSB connection,
For Ethernet connection,
The Ethernet function and the extended driver/library function are necessary. However, in case of Series 16i/18i/21i-B, 0i-B/C, the required CNC option is as follows. When Embedded Ethernet is used,above two optional functions are not required.
When Ethernet board is used,
- only Ethernet function is required.
CNC parameter
This function is not related to CNC parameter.
CNC mode
This function can be used in any CNC mode.
Available CNC
| 0i-A | 0i-B/C(Note) | 0i-D | 0i-F | 15 | 15i | 16 | 18 | 21 | 16i-A | 18i-A | 21i-A | 16i-B | 18i-B | 21i-B | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M (Machining) | |||||||||||||||||
| T (Turning) | - | ||||||||||||||||
| LC (Loader) | - | - | - | - | - | - | - | - |
| 0i-D | 0i-F | 16i | 18i | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|
| P (Punch press) | - | |||||
| L (Laser) | - | - | - | - | ||
| W (Wire) | - | - |
| Power Mate i-D | |
| Power Mate i-H | |
| Power Motion i-A | X |
| "O" | : | Both Ethernet and HSSB | |
| "E" | : | Ethernet | |
| "H" | : | HSSB | |
| "X" | : | Cannot be used | |
| "-" | : | None |
Note) 0i-C does not support the HSSB function.
See Also
