CNC_DWNEND3 | PROGRAM

Description

Notifies the end of downloading NC data to CNC.
(This function must be executed after cnc_download3.)

There are cases where errors(EW_DATA,EW_OVRFLOW, etc.) during execution of downloading NC program are returned by this function.

Further, this function does not return until the registration of the output data by cnc_download3 is completed.

MTConnect Fanuc Adapter

Universal Fanuc Driver

Fanuc Focas Library CD

Declaration

Arguments

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

Return code	Meaning/Error handling
EW_FUNC (1)	cnc_dwnstart3 function has not been executed.
EW_DATA (5)	Data error In order to get more information for this err_no return value, execute cnc_getdtailerr function. The following detail status will be set onto the member, err_no of ODBERR structure. 1 : A character which is unavailable for NC program is detected. 2 : When TV check is effective, a block which includes odd number of characters(including 'LF' at the end of the block) is detected. 3 : The registered program count is full. 4 : The same program number has already been registered. 5 : The same program number is selected on CNC. See Description about the timing of error.
EW_PROT (7)	Write protected on CNC side Tape memory is write-protected by the CNC parameter setting(O8000-/O9000- protection, encoding). See Description about the timing of error.
EW_OVRFLOW (8)	Memory overflow CNC tape memory shorts for the registration. Make enough free area in CNC memory. See Description about the timing of error.
EW_REJECT (13)	CNC execution denied (Series 15i) Downloading is disable in the current CNC status. (Machining, resetting, mode changing) See Description about the timing of error.
EW_ALARM (15)	Alarm state (Series 15i) Alarm has occurred while downloading. See Description about the timing of error.

As for the other return codes or the details, see "Return status of Data window function"

CNC option

And this function is related to the following CNC option.

• Series 15i
Pitch error compensation
Custom macro


• Series 16i/18i/21i, 0i, 30i, PMi-A
  Pitch error compensation
  Custom macro
  Work zero offset

For HSSB connection,

The extended driver/library function is necessary.

For Ethernet connection,

The Ethernet function and the extended driver/library function are necessary.

However, in case of Series 16i/18i/21i-B, 0i-B/C/D/F, Series 30i and PMi-A, the required CNC option is as follows.

When Embedded Ethernet is used,

above two optional functions are not required.

When Ethernet board is used,

only Ethernet function is required.

CNC parameter

This function is related to the following CNC parameter.
See the manual of CNC parameter for details.

• Series 15i
0020=16(HSSB), 7(Ethernet) (*) (must be set)
0022=16(HSSB), 7(Ethernet) (*) (must be set)
0020=7(*) (must be set)
0022=7(*) (must be set)
0000#0
2200#1,#3,#4
0011#0,2201#0
2210,2211,2212,2213
8000#0


• Series 16i/18i/21i, 0i, 30i, PMi-A
0000#0
3201#2,#5,#6
3202#0,#4
3204#3,#4
3210,3211
8900#0


• Power Mate i
0000#0
3201#2,#5,#6
3202#0,#4
3204#3,#4
8900#0

*	In case of NC program
	EDIT mode	:	0020 is used
	Not EDIT mode	:	0022 is used
*	In case of except NC program
	Not background editing	:	0020 is used
	Background editing	:	Cannot be used

CNC mode

This function can be used in any CNC mode.
(It is necessary to set mode according to the target data.)

Available CNC

	0i-A	0i-B/C(Note)	0i-D	0i-F	15	15i	16	18	21	16i-A	18i-A	21i-A	16i-B	18i-B	21i-B	30i-A	30i-B
M (Machining)	X	O	O	O	X	O	X	X	X	O	O	O	O	O	O	O	O
T (Turning)	X	O	O	O	X	-	X	X	X	O	O	O	O	O	O	O	O
LC (Loader)	-	-	-	-	-	-	X	X	X	X	X	X	X	X	X	-	-

	0i-D	0i-F	16i	18i	30i-A	30i-B
P (Punch press)	O	O	O	O	-	O
L (Laser)	-	-	O	-	-	O
W (Wire)	-	-	E	E	O	O

Power Mate i-D	O
Power Mate i-H	O
Power Motion i-A	O

	"O"	:	Both Ethernet and HSSB
	"E"	:	Ethernet
	"H"	:	HSSB
	"X"	:	Cannot be used
	"-"	:	None

Note) 0i-C does not support the HSSB function.

See Also

cnc_dwnstart3   cnc_download3  

Example(C Language)

See the example of cnc_download3.

Example(C#)