CNC_UPEND3 | PROGRAM

Description

Notifies the end of uploading NC program to the internal logic of the Data window library.
(This function must be executed after cnc_upload3 function.)

There are cases where errors(EW_DATA, etc.) during execution of uploading NC program are returned by this function.

MTConnect Fanuc Adapter

Universal Fanuc Driver

Fanuc Focas Library CD

Declaration

Arguments

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

Return code	Meaning/Error handling
EW_FUNC (1)	cnc_upstart3 function has not been executed.
EW_DATA (5)	Data error In order to get more information for this err_no return value, execute cnc_getdtailerr function. The following detail status will be set onto the member, err_no of ODBERR structure. 2 : Program is not found within the specified range. 3 : NC program memory is broken. See Description about the timing of error.
EW_PROT (7)	Protected Tape memory is read-protected by the CNC parameter setting(O8000-/O9000- protection, encoding). See Description about the timing of error.
EW_REJECT (13)	CNC execution denied (Series 15i) Uploading is disable in the current CNC status. (Machining, resetting, mode changing) See Description about the timing of error.
EW_ALARM (15)	Alarm state (Series 15i) Alarm has occurred while uploading. See Description about the timing of error.

As for the other return codes or the details, see "Return status of Data window function"

CNC option

And this function is related to the following CNC option.

• Series 15i
Pitch error cliompensation
Custom macro


• Series 16i/18i/21i, 0i, 30i, PMi-A
Pitch error compensation
Custom macro
Work zero offset

For HSSB connection,

The extended driver/library function is necessary.

For Ethernet connection,

The Ethernet function and the extended driver/library function are necessary.

However, in case of Series 16i/18i/21i-B, 0i-B/C/D/F, Series 30i and PMi-A, the required CNC option is as follows.

When Embedded Ethernet is used,

above two optional functions are not required.

When Ethernet board is used,

only Ethernet function is required.

CNC parameter

This function is related to the following CNC parameter.
See the manual of CNC parameter for details.

• Series 15i
0021=16(HSSB), 7(Ethernet) (*) (must be set)
0023=16(HSSB), 7(Ethernet) (*) (must be set)
0000#3
0011#0,#1,2201#0,#1
2210,2211,2212,2213


• Series 16i/18i/21i, 0i, 30i, PMi-A
0100#3
3202#0,#4,#6
3204#3,#4
3210,3211


• Power Mate i
0100#3
3202#0,#4,#6
3204#3,#4

*	In case of NC program
	EDIT mode	:	0021 is used
	Not EDIT mode	:	0023 is used
*	In case of except NC program
	Not background editing	:	0021 is used
	Background editing	:	0023 is used

CNC mode

This function can be used in any CNC mode.
(It is necessary to set mode according to the target data.)

Available CNC

	0i-A	0i-B/C(Note)	0i-D	0i-F	15	15i	16	18	21	16i-A	18i-A	21i-A	16i-B	18i-B	21i-B	30i-A	30i-B
M (Machining)	X	O	O	O	X	O	X	X	X	O	O	O	O	O	O	O	O
T (Turning)	X	O	O	O	X	-	X	X	X	O	O	O	O	O	O	O	O
LC (Loader)	-	-	-	-	-	-	X	X	X	X	X	X	X	X	X	-	-

	0i-D	0i-F	16i	18i	30i-A	30i-B
P (Punch press)	O	O	O	O	-	O
L (Laser)	-	-	O	-	-	O
W (Wire)	-	-	E	E	O	O

Power Mate i-D	O
Power Mate i-H	O
Power Motion i-A	O

	"O"	:	Both Ethernet and HSSB
	"E"	:	Ethernet
	"H"	:	HSSB
	"X"	:	Cannot be used
	"-"	:	None

Note) 0i-C does not support the HSSB function.

See Also

cnc_upstart3   cnc_upload3  

Example(C Language)

See the example of cnc_upload3.

Example(C#)