Description
Notifies the start of uploading NC program to the internal logic of the Data window library.
(This function must be executed before cnc_upload /
cnc_cupload.)
In Series 16/18,16i/18i, 0i-F, 30i, Power Mate i, t is possible to use this function for
the program number 8 digits, however it is necessary to switch API to
the one for the program number 8 digits.
In Series 15i, it is necessary to switch API to the one for the program number 8 digits.
See Program number 8 digits for details.
Universal Fanuc Driver
Fanuc Focas Library CD
Declaration
For the program number 8 digits :
Arguments : HSSB
Specify the library handle.
See "Library handle" for details.
Specify program number
Return
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
| Return code | Meaning/Error handling |
|---|---|
(1) |
Unavailable This application is not customized for the program number 8 digits. See "Library handle" for details. |
(-1) |
Series15/15i
|
(5) |
Program(number) is not found. |
As for the other return codes or the details, see "Return status of Data window function"
CNC option
For HSSB connection,
CNC parameter
This function is related to the following CNC parameter.
See the manual of CNC parameter for details.
0021=16 (EDIT mode) (must be set)
0023=16 (except EDIT mode) (must be set)
CNC mode
This function can be used in any CNC mode.
Available CNC
| 0i-A | 0i-B/C(Note) | 0i-D | 0i-F | 15 | 15i | 16 | 18 | 21 | 16i-A | 18i-A | 21i-A | 16i-B | 18i-B | 21i-B | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M (Machining) | |||||||||||||||||
| T (Turning) | - | ||||||||||||||||
| LC (Loader) | - | - | - | - | - | - | - | - |
| 0i-D | 0i-F | 16i | 18i | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|
| P (Punch press) | - | |||||
| L (Laser) | - | - | - | - | ||
| W (Wire) | - | - |
| Power Mate i-D | |
| Power Mate i-H | |
| Power Motion i-A | H |
| "O" | : | Both Ethernet and HSSB | |
| "E" | : | Ethernet | |
| "H" | : | HSSB | |
| "X" | : | Cannot be used | |
| "-" | : | None |
Note) 0i-C does not support the HSSB function.
See Also
cnc_upload cnc_cupload cnc_upend
