Description
Notifies the end of verification of NC program to CNC.
(This function must be executed after cnc_verify/cnc_cverify.)
There are cases where errors(EW_DATA,EW_OVRFLOW, etc.) during execution of verifying NC program are returned by this function.
Further, this function does not return until the verification of the output data by cnc_verify(cnc_cverify) is completed.
Universal Fanuc Driver
Fanuc Focas Library CD
Declaration
Arguments
Specify the library handle. See "Library handle" for details.
Return
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
| Return code | Meaning/Error handling |
|---|---|
(1) |
|
(5) |
See 'Description' about the generation timing. |
As for the other return codes or the details, see "Return status of Data window function"
CNC option
For HSSB connection,
For Ethernet connection,
The Ethernet function and the extended driver/library function are necessary. However, in case of Series 16i/18i/21i-B, 0i-B/C/F and 30i, the required CNC option is as follows. When Embedded Ethernet is used,above two optional functions are not required.
When Ethernet board is used,
- only Ethernet function is required.
CNC parameter
This function is related to the following CNC parameter.
See the manual of CNC parameter for details.
0022=16(except EDIT mode) (must be set) (At HSSB connection)
0020=7 (EDIT mode) (must be set) (At Ethernet connection)
0022=7 (except EDIT mode) (must be set) (At Ethernet connection)
0000#0
0011#0,2201#0
2210,2211,2212,2213
3202#0,#4
3204#3,#4
3210,3211
3202#0,#4
3204#3,#4
CNC mode
(It is necessary to set the parameter according to the mode)
Available CNC
| 0i-A | 0i-B/C(Note) | 0i-D | 0i-F | 15 | 15i | 16 | 18 | 21 | 16i-A | 18i-A | 21i-A | 16i-B | 18i-B | 21i-B | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M (Machining) | |||||||||||||||||
| T (Turning) | - | ||||||||||||||||
| LC (Loader) | - | - | - | - | - | - | - | - |
| 0i-D | 0i-F | 16i | 18i | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|
| P (Punch press) | - | |||||
| L (Laser) | - | - | - | - | ||
| W (Wire) | - | - |
| Power Mate i-D | |
| Power Mate i-H | |
| Power Motion i-A | H |
| "O" | : | Both Ethernet and HSSB | |
| "E" | : | Ethernet | |
| "H" | : | HSSB | |
| "X" | : | Cannot be used | |
| "-" | : | None |
Note) 0i-C does not support the HSSB function.
See Also
cnc_vrfstart cnc_verify cnc_cverify
