Description
Reads the actual tool zone data number and its data. The number and data are stored in each member of the ODBACTTLZN structure(user define type).
Universal Fanuc Driver
Fanuc Focas Library CD
Declaration
Arguments
Specify the library handle. See "Library handle" for details.
Pointer to the ODBACTTLZN structure including the actual number and data for the tool zone. The ODBACTTLZN structure is as follows.
typedef struct odbacttlzn {
short act_no; /* Actual tool zone data number */
long data[2]; /* Actual tool zone data */
} ODBACTTLZN ;
- act_no
- Actual tool zone data number is set. (1,..,12)
- data
- Actual tool zone data is set.
data[0] : Item X data[1] : Item Y
Return
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
| Return code | Meaning/Error handling |
|---|---|
(1) |
This function cannot be used except 0i-PD/PF, 16i/18i-P, 30i/31i-LB, 30i/31i-PB. |
(6) |
The safety zone check function and the extended driver/library function are necessary. It is necessary to set Punch press function option and Parameter ALA(No.16242#0).(30i/31i-LB only) |
As for the other return codes or the details, see "Return status of Data window function"
CNC option
This function need the following CNC option.
For HSSB connection,
For Ethernet connection,
The Ethernet function and the extended driver/library function are necessary. When Embedded Ethernet is used,above two optional functions are not required.
When Ethernet board is used,
- only Ethernet function is required.
CNC parameter
This function is related to the following CNC parameter.
See the manual of CNC parameter for details.
CNC mode
This function can be used in any CNC mode.
Available CNC
| 0i-A | 0i-B/C(Note) | 0i-D | 0i-F | 15 | 15i | 16 | 18 | 21 | 16i-A | 18i-A | 21i-A | 16i-B | 18i-B | 21i-B | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M (Machining) | |||||||||||||||||
| T (Turning) | - | ||||||||||||||||
| LC (Loader) | - | - | - | - | - | - | - | - |
| 0i-D | 0i-F | 16i | 18i | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|
| P (Punch press) | - | |||||
| L (Laser) | - | - | - | - | ||
| W (Wire) | - | - |
| Power Mate i-D | |
| Power Mate i-H | |
| Power Motion i-A | - |
| "O" | : | Both Ethernet and HSSB | |
| "E" | : | Ethernet | |
| "H" | : | HSSB | |
| "X" | : | Cannot be used | |
| "-" | : | None |
Note) 0i-C does not support the HSSB function.
See Also
cnc_rdsafetyzone cnc_wrsafetyzone cnc_rdtoolzone cnc_wrtoolzone cnc_rdsetzone cnc_wrsetzone
