Description
Inserts the tool data. Tool information is set with the state of "life remaining." Added data is inserted after the specified tool use-order number.
If a tool is added to an unregistered tool group, the tool group itself is registered. In this case, the life value, life counter, H code, and D code are set to 0, and the life counter assumes the parameter setting.
This function is not available for T/TT system. (except 30i series, 0i-D/F)
Universal Fanuc Driver
Fanuc Focas Library CD
Declaration
Arguments
Specify the library handle. See "Library handle" for details.
Pointer to the IDBITD structure to set the tool data. The IDBITD structure is as follows.
typedef struct idbitd {
short datano; /* Tool group number. */
short type; /* Tool use-order number. */
long data; /* Tool number. */
} IDBITD ;
- datano
- Specify the tool group number.
- type
- Specify the tool use-order number.
- data
- Specify the tool number.
Return
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
| Return code | Meaning/Error handling | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
(3) |
The specification of tool group number(datano) is wrong. |
||||||||||||
(4) |
The specification of tool use-order number(type) is wrong. |
||||||||||||
(5) |
The specification of tool number(data) is wrong. In order to get more information for this err_no return value, execute cnc_getdtailerr() function. The following details status will be set onto the member, err_no of ODBERR structure.(30i, 0i-D/F only)
|
||||||||||||
(6) |
The tool life management function and the extended driver/library function are necessary. |
||||||||||||
(8) |
The maximum number of tool which can be registered is exceeded. |
||||||||||||
(13) |
Cannot write as the executing, selecting or buffering group. |
As for the other return codes or the details, see "Return status of Data window function"
CNC option
This function need the following CNC option.
And this function is related to the following CNC option.
- Series 15/15i
This function is influenced by 1024/512 pairs of the tool life management.
- Series 16/18/21, 16i/18i/21i
This function is influenced by 512(M Series) pairs of the tool life management.
- Series 0i-F, 30i/31i/32i
This function is influenced by additional pairs number of the tool life management.
the tool life management : 256 pairs of the tool life management on whole system. additional pairs number of the tool life management : 1024 pairs of the tool life management on whole system.
For HSSB connection,
The extended driver/library function are necessary.
For Ethernet connection,
The Ethernet function and the extended driver/library function are necessary. However, in case of Series 16i/18i/21i-B, 0i-B/C/D/F and 30i the required CNC option is as follows. When Embedded Ethernet is used,above two optional functions are not required.
When Ethernet board is used,
- only Ethernet function is required.
CNC parameter
This function is related to the following CNC parameter.
See the manual of CNC parameter for details.
6813
8132#0=1 (must be set)
6813
8132#0=1 (must be set)
CNC mode
This function can be used in any CNC mode.
Available CNC
| 0i-A | 0i-B/C(Note) | 0i-D | 0i-F | 15 | 15i | 16 | 18 | 21 | 16i-A | 18i-A | 21i-A | 16i-B | 18i-B | 21i-B | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M (Machining) | |||||||||||||||||
| T (Turning) | - | ||||||||||||||||
| LC (Loader) | - | - | - | - | - | - | - | - |
| 0i-D | 0i-F | 16i | 18i | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|
| P (Punch press) | - | |||||
| L (Laser) | - | - | - | - | ||
| W (Wire) | - | - |
| Power Mate i-D | |
| Power Mate i-H | |
| Power Motion i-A | X |
| "O" | : | Both Ethernet and HSSB | |
| "E" | : | Ethernet | |
| "H" | : | HSSB | |
| "X" | : | Cannot be used | |
| "-" | : | None |
Note) 0i-C does not support the HSSB function.
