Description
Reads the tool group number in which the specified tool is registered.
When the same tool number exists in two or more tool groups, the smallest group number is stored.
Please use this function because the cnc_rdgrpid function cannot be used when the option, "Tool life management B" is used with Series 16i,18i.
And gets the tool group number by this function with Series 0i-F, 30i, so use cnc_rdgrpid function in case of setting the tool number of under 4 digits.
Universal Fanuc Driver
Fanuc Focas Library CD
Declaration
Arguments
Specify the library handle. See "Library handle" for details.
Specify the tool number.
Pointer to the ODBTLIFE5 structure including the tool group number. The ODBTLIFE5 structure is as follows.
typedef struct odbtlife5 {
long dummy ; /* Not used. */
long type ; /* Tool number. */
long data ; /* Tool group number. */
} ODBTLIFE5 ;
Return
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
| Return code | Meaning/Error handling |
|---|---|
(4) |
The specification of tool number(number) is wrong. |
(6) |
As for the other return codes or the details, see "Return status of Data window function"
CNC option
This function need the following CNC option.
- Series 15/15i, 16/18/21/21i, 0i, 30i The tool life management function.
- Series 16i/18i The tool life management function or the tool life management B function.
And this function is related to the following CNC option.
- Series 15i
This function is influenced by 1024/512 pairs of the tool life management.
- Series 16/18/21, 16i/18i/21i
This function is influenced by 512(M Series)/128(T Series) pairs of the tool life management.
- Series 0i-F, 30i
This function is influenced by additional pairs number of the tool life management.
the tool life management : 256 pairs of the tool life management on whole system, both of M and T Series additional pairs number of the tool life management : 1024 pairs of the tool life management on whole system, both of M and T Series
For HSSB connection,
The extended driver/library function are necessary.
For Ethernet connection,
The Ethernet function and the extended driver/library function are necessary. However, in case of Series 16i/18i/21i-B, 0i-B/C/D/F and 30i the required CNC option is as follows. When Embedded Ethernet is used,above two optional functions are not required.
When Ethernet board is used,
- only Ethernet function is required.
CNC parameter
This function is related to the following CNC parameter.
See the manual of CNC parameter for details.
6813
8132#0=1 (must be set)
6813
8132#0=1 (must be set)
CNC mode
This function can be used in any CNC mode.
Available CNC
| 0i-A | 0i-B/C(Note) | 0i-D | 0i-F | 15 | 15i | 16 | 18 | 21 | 16i-A | 18i-A | 21i-A | 16i-B | 18i-B | 21i-B | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M (Machining) | |||||||||||||||||
| T (Turning) | - | ||||||||||||||||
| LC (Loader) | - | - | - | - | - | - | - | - |
| 0i-D | 0i-F | 16i | 18i | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|
| P (Punch press) | - | |||||
| L (Laser) | - | - | - | - | ||
| W (Wire) | - | - |
| Power Mate i-D | |
| Power Mate i-H | |
| Power Motion i-A | X |
| "O" | : | Both Ethernet and HSSB | |
| "E" | : | Ethernet | |
| "H" | : | HSSB | |
| "X" | : | Cannot be used | |
| "-" | : | None |
Note) 0i-C does not support the HSSB function.
See Also
