CNC_RDGRPINFO3 | TOOLLIFE

Description

Declaration

Arguments

Specify the length of the data block (size of IODBTGI3 structure)

IODBTGI3

N is the number of the tool group to be read.

typedef struct iodbtgi {
    short      s_grp;          /* start group number */
    short      dummy;          /* unused */
    short      e_grp;          /* end group number */
    long       life_rest[N];   /* rest counter */
} IODBTGI3 ;    /* N is the number of tool group to be read. */

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

As for the other return codes or the details, see "Return status of Data window function"

CNC option

This function need the following CNC option.

• Series 16i/18i
  

  The tool life management B function.

• Series 30i
  

  The tool life management function.

And this function is related to the following CNC option.

• Series 16i/18i
  

  This function is influenced by 512(M Series) pairs of the tool life management.

• Series 0i-F, 30i
  

  This function is influenced by additional pairs number of the tool life management.

  the tool life management	:	256 pairs of the tool life management on whole system with M Series
  additional pairs number of the tool life management	:	1024 pairs of the tool life management on whole system with M Series

For HSSB connection,

The extended driver/library function are necessary.

For Ethernet connection,

The Ethernet function and the extended driver/library function are necessary.

However, in case of Series 16i/18i-B, 0i-F and 30i the required CNC option is as follows.

When Embedded Ethernet is used,

above two optional functions are not required.

When Ethernet board is used,

only Ethernet function is required.

CNC parameter

This function is related to the following CNC parameter.
See the manual of CNC parameter for details.

• Series 16i/18i
6800#0,#1,#2 (influenced by setting) 6802#3 (Rest counter)

• Series 30i
  6800#0,#1,#2 (influenced by setting)
  6805#4 (Tool life management B)
  6802#3 (Rest counter)
  
• Series 0i-F
  6800#0,#1,#2 (influenced by setting)
  6805#4 (Tool life management B)
  6802#3 (Rest counter)
  8132#0=1 (must be set)
  

CNC mode

This function can be used in any CNC mode.

Available CNC

Note) 0i-C does not support the HSSB function.