Description
Reads the maximum number of tool within group.
Universal Fanuc Driver
Fanuc Focas Library CD
Declaration
Arguments
Specify the library handle. See "Library handle" for details.
Pointer to the ODBLFNO structure including the maximum number of tool group. The ODBLFNO structure is as follows.
typedef struct odblfno {
short datano; /* Not used. */
short type; /* Not used. */
short data /* Maximum number of tool within group. */
} ODBLFNO ;
Return
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
| Return code | Meaning/Error handling |
|---|---|
(6) |
The tool life management function and the extended driver/library function are necessary. |
As for the other return codes or the details, see "Return status of Data window function"
CNC option
This function need the following CNC option.
And this function is related to the following CNC option.
- Series 15/15i
This function is influenced by 1024/512 pairs of the tool life management.
- Series 16/18/21, 16i/18i/21i
This function is influenced by 512(M Series)/128(T Series) pairs of the tool life management.
- Series 0i-F, 30i
This function is influenced by additional pairs number of the tool life management.
the tool life management : 256 pairs of the tool life management on whole system, both of M and T Series additional pairs number of the tool life management : 1024 pairs of the tool life management on whole system, both of M and T Series
For HSSB connection,
The extended driver/library function are necessary.
For Ethernet connection,
The Ethernet function and the extended driver/library function are necessary. However, in case of Series 16i/18i/21i-B, 0i-B/C/D/F and 30i the required CNC option is as follows. When Embedded Ethernet is used,above two optional functions are not required.
When Ethernet board is used,
- only Ethernet function is required.
CNC parameter
This function is related to the following CNC parameter.
See the manual of CNC parameter for details.
6813
8132#0=1 (must be set)
6813
8132#0=1 (must be set)
CNC mode
This function can be used in any CNC mode.
Available CNC
| 0i-A | 0i-B/C(Note) | 0i-D | 0i-F | 15 | 15i | 16 | 18 | 21 | 16i-A | 18i-A | 21i-A | 16i-B | 18i-B | 21i-B | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M (Machining) | |||||||||||||||||
| T (Turning) | - | ||||||||||||||||
| LC (Loader) | - | - | - | - | - | - | - | - |
| 0i-D | 0i-F | 16i | 18i | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|
| P (Punch press) | - | |||||
| L (Laser) | - | - | - | - | ||
| W (Wire) | - | - |
| Power Mate i-D | |
| Power Mate i-H | |
| Power Motion i-A | X |
| "O" | : | Both Ethernet and HSSB | |
| "E" | : | Ethernet | |
| "H" | : | HSSB | |
| "X" | : | Cannot be used | |
| "-" | : | None |
Note) 0i-C does not support the HSSB function.
