Description
Reads the tool information of the specified tool group and tool number.
This function cannot be used with Series 15i or the "Tool life management B" option of Series 16i/18i, so use cnc_rd1tlifedat2 function instead of cnc_t1info function.
And this function can be only used by the tool number of under 4 digits, so use cnc_rd1tlifedat2 function in case of setting the tool number of over 4 digits with Series 0i-F, 30i.
Universal Fanuc Driver
Fanuc Focas Library CD
Declaration
Arguments
Specify the library handle. See "Library handle" for details.
Specify the tool group number.
Specify the tool number.
Pointer to the ODBTLIFE4 structure including the tool information. The ODBTLIFE4 structure is as follows.
typedef struct odbtlife4 {
short datano ; /* Tool group number. */
short type ; /* Tool number. */
long data ; /* Tool information. */
} ODBTLIFE4 ;
| tinfo1.data | Tool information |
|---|---|
| 0 | (refer to the following) |
| 1 | This tool is registered(available). |
| 2 | This tool has expired. |
| 3 | This tool was skipped. |
The currently used tool group and tool are referred by specifying 0 in "grp_num" and "tool_num". However, in case that any tool group number has never be specified since power-on, 0 is stored.
Return
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
| Return code | Meaning/Error handling |
|---|---|
(1) |
The tool life management B option is used. |
(3) |
The specification of tool group number(grp_num) is wrong. |
(4) |
The specification of tool number(tool_num) is wrong. |
(6) |
The tool life management function and the extended driver/library function are necessary. |
As for the other return codes or the details, see "Return status of Data window function"
CNC option
This function need the following CNC option.
The tool life management function is necessary.
And this function is related to the following CNC option.
- Series 15
This function is influenced by 1024/512 pairs of the tool life management.
- Series 16/18/21, 16i/18i/21i
This function is influenced by 512(M Series)/128(T Series) pairs of the tool life management.
- Series 0i-F, 30i
This function is influenced by additional pairs number of the tool life management.
the tool life management : 256 pairs of the tool life management on whole system, both of M and T Series additional pairs number of the tool life management : 1024 pairs of the tool life management on whole system, both of M and T Series
For HSSB connection,
The extended driver/library function is necessary.
For Ethernet connection,
The Ethernet function and the extended driver/library function are necessary. However, in case of Series 16i/18i/21i-B, 0i-B/C/D/F and 30i the required CNC option is as follows. When Embedded Ethernet is used,above two optional functions are not required.
When Ethernet board is used,
- only Ethernet function is required.
CNC parameter
This function is related to the following CNC parameter.
See the manual of CNC parameter for details.
6813
8132#0=1 (must be set)
6813
8132#0=1 (must be set)
CNC mode
This function can be used in any CNC mode.
Available CNC
| 0i-A | 0i-B/C(Note) | 0i-D | 0i-F | 15 | 15i | 16 | 18 | 21 | 16i-A | 18i-A | 21i-A | 16i-B | 18i-B | 21i-B | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M (Machining) | |||||||||||||||||
| T (Turning) | - | ||||||||||||||||
| LC (Loader) | - | - | - | - | - | - | - | - |
| 0i-D | 0i-F | 16i | 18i | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|
| P (Punch press) | - | |||||
| L (Laser) | - | - | - | - | ||
| W (Wire) | - | - |
| Power Mate i-D | |
| Power Mate i-H | |
| Power Motion i-A | X |
| "O" | : | Both Ethernet and HSSB | |
| "E" | : | Ethernet | |
| "H" | : | HSSB | |
| "X" | : | Cannot be used | |
| "-" | : | None |
Note) 0i-C does not support the HSSB function.
