Description
Reads the tool number of the specified tool group and tool use-order number.
Universal Fanuc Driver
Fanuc Focas Library CD
Declaration
Arguments
Specify the library handle. See "Library handle" for details.
Specify the tool group number.
Specify the tool use-order number.
Pointer to the ODBTLIFE4 structure including the tool number. The ODBTLIFE4 structure is as follows.
typedef struct odbtlife4 {
short datano ; /* Tool group number. */
short type ; /* Tool use-order number. */
long data ; /* Tool number. */
} ODBTLIFE4 ;
The currently used tool group and tool are referred by specifying 0 in "grp_num". However, in case that any tool group number has never be specified since power-on, 0 is stored.
In case of specifying 0 in "tuse_num", either the currently used tool for already used tool group or the first tool for not-used tool group is referred.
Return
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
| Return code | Meaning/Error handling |
|---|---|
(3) |
The specification of tool group number(grp_num) is wrong. |
(4) |
The specification of tool use-order number (tuse_num) is wrong. |
(6) |
The tool life management function and the extended driver/library function are necessary. |
As for the other return codes or the details, see "Return status of Data window function"
CNC option
This function need the following CNC option.
The tool life management function is necessary.
And this function is related to the following CNC option.
- Series 15/15i
This function is influenced by 1024/512 pairs of the tool life management.
- Series 16/18/21, 16i/18i/21i
This function is influenced by 512(M Series)/128(T Series) pairs of the tool life management.
- Series 0i-F, 30i
This function is influenced by additional pairs number of the tool life management.
the tool life management : 256 pairs of the tool life management on whole system, both of M and T Series additional pairs number of the tool life management : 1024 pairs of the tool life management on whole system, both of M and T Series
For HSSB connection,
The extended driver/library function is necessary.
For Ethernet connection,
The Ethernet function and the extended driver/library function are necessary. However, in case of Series 16i/18i/21i-B, 0i-B/C/D/F and 30i the required CNC option is as follows. When Embedded Ethernet is used,above two optional functions are not required.
When Ethernet board is used,
- only Ethernet function is required.
CNC parameter
This function is related to the following CNC parameter.
See the manual of CNC parameter for details.
6813
8132#0=1 (must be set)
6813
8132#0=1 (must be set)
CNC mode
This function can be used in any CNC mode.
Available CNC
| 0i-A | 0i-B/C(Note) | 0i-D | 0i-F | 15 | 15i | 16 | 18 | 21 | 16i-A | 18i-A | 21i-A | 16i-B | 18i-B | 21i-B | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M (Machining) | |||||||||||||||||
| T (Turning) | - | ||||||||||||||||
| LC (Loader) | - | - | - | - | - | - | - | - |
| 0i-D | 0i-F | 16i | 18i | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|
| P (Punch press) | - | |||||
| L (Laser) | - | - | - | - | ||
| W (Wire) | - | - |
| Power Mate i-D | |
| Power Mate i-H | |
| Power Motion i-A | X |
| "O" | : | Both Ethernet and HSSB | |
| "E" | : | Ethernet | |
| "H" | : | HSSB | |
| "X" | : | Cannot be used | |
| "-" | : | None |
Note) 0i-C does not support the HSSB function.
