CNC_DELMAG_PROPERTY | TOOLMNG

Description

Declaration

Arguments

typedef struct  iodbmagprty2 {
    short           mag ;           /* Magazine number */
    short           reserve ;       /* Reserved        */
} IODBMAGPRTY2;

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

As for the other return codes or the details, see "Return status of Data window function"

CNC option

This function need the following CNC option.

The Tool management function 64-pairs, 240-pairs or 1000 pairs and the tool management extension B function are necessary.

For HSSB connection,

The extended driver/library function are necessary.

For Ethernet connection,

The Ethernet function and the extended driver/library function are necessary.

However, in case of Series 16i/18i/21i-B, 0i-F and 30i, the required CNC option is as follows.

When Embedded Ethernet is used,

above two optional functions are not required.

When Ethernet board is used,

only Ethernet function is required.

CNC parameter

This function is related to the following CNC parameter.
See the manual of CNC parameter for details.

Magazine property / pot property (No.13210#1=1)

CNC mode

This function can be used in any CNC mode.

Available CNC

Note) 0i-C does not support the HSSB function.

See Also

cnc_rdmag_property   cnc_wrmag_property