Description
Deletes the Tool management data which is specified by the start data number and the number of the data from the Tool management data table.
Deletion by this function is done sequentially one by one. Once the error occurs, succeeding deletion is aborted.
When the Tool management data is deleted normally from the Tool management data table by this function, the tool number is also deleted from the Magazine management table by the CNC process.
Note) This function is only for "Fast Ethernet board" and "Embedded Ethernet". So, this function is not supported at "Ethernet board".
Universal Fanuc Driver
Fanuc Focas Library CD
Declaration
Arguments
Specify the library handle. See "Library handle" for details.
Specify the start data number for the deletion from the Tool management data table.
Specify the pointer to the number of the deleting data for the deletion from the Tool management data table. Set the number of the deleting data(1...) to the pointed data before calling this function.
This function deletes the number of Tool management data specified by "*data_num", from the index specified by "s_number". After the execution of this function, *data_num holds the real deleted number of data.
Return
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
| Return code | Meaning/Error handling |
|---|---|
(-1) |
|
(3) |
|
(6) |
The Tool management function 64 pairs, or the Tool management function 240 pairs, or the Tool management function 1000 pairs. |
(7) |
The Tool management data table is write protected. |
As for the other return codes or the details, see "Return status of Data window function"
CNC option
This function need the following CNC option.
And this function is related to the following CNC option.
This function is influenced by the additional customized data on tool management function option(5-20),(5-40).
For HSSB connection,
The extended driver/library function are necessary.
For Ethernet connection,
The Ethernet function and the extended driver/library function are necessary. However, in case of Series 16i/18i/21i-B, 0i-F and 30i, the required CNC option is as follows. When Embedded Ethernet is used,above two optional functions are not required.
When Ethernet board is used,
- only Ethernet function is required.
CNC parameter
This function is related to the following CNC parameter.
See the manual of CNC parameter for details.
13220 (valid number of Tool management data)
CNC mode
This function can be used in any CNC mode.
Available CNC
| 0i-A | 0i-B/C(Note) | 0i-D | 0i-F | 15 | 15i | 16 | 18 | 21 | 16i-A | 18i-A | 21i-A | 16i-B | 18i-B | 21i-B | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M (Machining) | |||||||||||||||||
| T (Turning) | - | ||||||||||||||||
| LC (Loader) | - | - | - | - | - | - | - | - |
| 0i-D | 0i-F | 16i | 18i | 30i-A | 30i-B | |
|---|---|---|---|---|---|---|
| P (Punch press) | - | |||||
| L (Laser) | - | - | - | - | ||
| W (Wire) | - | - |
| Power Mate i-D | |
| Power Mate i-H | |
| Power Motion i-A | X |
| "O" | : | Both Ethernet and HSSB | |
| "E" | : | Ethernet | |
| "H" | : | HSSB | |
| "X" | : | Cannot be used | |
| "-" | : | None |
Note) 0i-C does not support the HSSB function.
See Also
cnc_regtool cnc_regtool_f2 cnc_rdtool cnc_rdtool_f2 cnc_wrtool cnc_wrtool_f2 cnc_wrtool2
