CNC_RDTOOL | TOOLMNG

Description

Reads the Tool management data which is specified by the start data number and the number of the data from the Tool management data table.

Reading by this function is done sequentially one by one. Once the error occurs, succeeding reading is aborted.

Note) This function is only for "Fast Ethernet board" and "Embedded Ethernet". So, this function is not supported at "Ethernet board".

MTConnect Fanuc Adapter

Universal Fanuc Driver

Fanuc Focas Library CD

Declaration

Arguments

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

Return code	Meaning/Error handling
EW_BUSY (-1)	Other users(such as PMC) have accessed to the same data window. Try this function again.
EW_NUMBER (3)	The start data number for the Tool management data table(s_number) is invalid. Or, valid number of the data on the Tool management data table exceeds.
EW_NOOPT (6)	No option The Tool management function 64 pairs, or the Tool management function 240 pairs, or the Tool management function 1000 pairs.

As for the other return codes or the details, see "Return status of Data window function"

CNC option

This function need the following CNC option.

The Tool management function 64 pairs, or the Tool management function 240 pairs, or the Tool management function 1000 pairs.

And this function is related to the following CNC option.

This function is influenced by the additional customized data on tool management function option(5-20).

For HSSB connection,

The extended driver/library function are necessary.

For Ethernet connection,

The Ethernet function and the extended driver/library function are necessary.

However, in case of Series 16i/18i/21i-B, 0i-F and 30i, the required CNC option is as follows.

When Embedded Ethernet is used,

above two optional functions are not required.

When Ethernet board is used,

only Ethernet function is required.

CNC parameter

This function is related to the following CNC parameter.
See the manual of CNC parameter for details.

13220 (Valid number of Tool management data)
13222 (Number of data for the 1st magazine)
13223 (Starting pot number for the 1st magazine)
13227 (Number of data for the 2nd magazine)
13228 (Starting pot number for the 2nd magazine)
13232 (Number of data for the 3rd magazine)
13233 (Starting pot number for the 3rd magazine)
13237 (Number of data for the 4th magazine)
13238 (Starting pot number for the 4th magazine)

CNC mode

This function can be used in any CNC mode.

Available CNC

	0i-A	0i-B/C(Note)	0i-D	0i-F	15	15i	16	18	21	16i-A	18i-A	21i-A	16i-B	18i-B	21i-B	30i-A	30i-B
M (Machining)	X	X	X	O	X	X	X	X	X	O	O	O	O	O	O	O	O
T (Turning)	X	X	X	O	X	-	X	X	X	X	X	X	O	O	O	O	O
LC (Loader)	-	-	-	-	-	-	X	X	X	X	X	X	X	X	X	-	-

	0i-D	0i-F	16i	18i	30i-A	30i-B
P (Punch press)	X	X	X	X	-	X
L (Laser)	-	-	X	-	-	X
W (Wire)	-	-	X	X	X	X

Power Mate i-D	X
Power Mate i-H	X
Power Motion i-A	X

	"O"	:	Both Ethernet and HSSB
	"E"	:	Ethernet
	"H"	:	HSSB
	"X"	:	Cannot be used
	"-"	:	None

Note) 0i-C does not support the HSSB function.

See Also

cnc_regtool   cnc_regtool_f2   cnc_deltool   cnc_rdtool_f2   cnc_wrtool   cnc_wrtool_f2   cnc_wrtool2