CNC_WRTOOLGEOM_TLM | TOOLMNG

Description

Declaration

Arguments

typedef struct  tlmngtlgeom {
    unsigned char l_pot_num;    /* Left pot occupation unit */
    unsigned char r_pot_num;    /* Right pot occupation unit */
    unsigned char u_pot_num;    /* Upper pot occupation unit (0i-F, 30i/31i/32i only) */
    unsigned char d_pot_num;    /* Lower pot occupation unit (0i-F, 30i/31i/32i only) */
    unsigned char tl_geom_num ; /* Geometry A or B (0i-F, 30i/31i/32i only) */
} IODBTLGEOM;  

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

As for the other return codes or the details, see "Return status of Data window function"

CNC option

This function need the following CNC option.

The Tool management function 64 pairs, or the Tool management function 240 pairs, or the Tool management function 1000 pairs and Tool management function oversize tools support option.

For HSSB connection,

The extended driver/library function are necessary.

For Ethernet connection,

The Ethernet function and the extended driver/library function are necessary.

However, in case of Series 16i/18i/21i-B, 0i-F and 30i, the required CNC option is as follows.

When Embedded Ethernet is used,

above two optional functions are not required.

When Ethernet board is used,

only Ethernet function is required.

CNC parameter

This function is not related to CNC parameter.

CNC mode

This function can be used in any CNC mode.

Available CNC

Note) 0i-C does not support the HSSB function.

See Also

cnc_rdtoolgeom_tlm