NewsCNCnetPDMAbout usSupport
  

DATA ON SUPER OPTION | CITIZEN MITSUBISHI COMMANDS

Option bit 1 Option bit 2 Option bit 3 Option bit 4 Option bit 5 Option bit 6 Option bit 7 Option bit 8 Option bit 9 Option bit 10 Option bit 11 Option bit 12 Option bit 13 Option bit 14 Option bit 15

See: IIoT Device Driver for Citizen Mitsubishi controllers

CommandDescription
SECT_SPO_OP01
Option bit 1
SECT_SPO_OP02
Option bit 2
SECT_SPO_OP03
Option bit 3
SECT_SPO_OP04
Option bit 4
SECT_SPO_OP05
Option bit 5
SECT_SPO_OP06
Option bit 6
SECT_SPO_OP07
Option bit 7
SECT_SPO_OP08
Option bit 8
SECT_SPO_OP09
Option bit 9
SECT_SPO_OP10
Option bit 10
SECT_SPO_OP11
Option bit 11
SECT_SPO_OP12
Option bit 12
SECT_SPO_OP13
Option bit 13
SECT_SPO_OP14
Option bit 14
SECT_SPO_OP15
Option bit 15
SECT_SPO_OP16
Option bit 16
SECT_SPO_OP17
Option bit 17
SECT_SPO_OP18
Option bit 18
SECT_SPO_OP19
Option bit 19
SECT_SPO_OP20
Option bit 20
SECT_SPO_OP21
Option bit 21
SECT_SPO_OP22
Option bit 22
SECT_SPO_OP23
Option bit 23
SECT_SPO_OP24
Option bit 24
SECT_SPO_OP25
Option bit 25
SECT_SPO_OP26
Option bit 26
SECT_SPO_OP27
Option bit 27
SECT_SPO_OP28
Option bit 28
SECT_SPO_OP29
Option bit 29
SECT_SPO_OP30
Option bit 30
SECT_SPO_OP31
Option bit 31
SECT_SPO_OP32
Option bit 32
SECT_SPO_OP33
Option bit 33
SECT_SPO_OP34
Option bit 34
SECT_SPO_OP35
Option bit 35
SECT_SPO_OP36
Option bit 36
SECT_SPO_OP37
Option bit 37
SECT_SPO_OP38
Option bit 38
SECT_SPO_OP39
Option bit 39
SECT_SPO_OP40
Option bit 40
SECT_SPO_OFSNU
Number of tool sets
SECT_SPO_TLFSZ
Tool life management tool count
SECT_SPO_PRSZ
Machining program storage capacity
SECT_SPO_VALTP
Common variable group number

 

Privacy notice

This website uses cookies. By continuing to use it you agree to our privacy policy. 

https://www.inventcom.net/support/citizen-mitsubishi-commands/data-on-super-option

Support | Citizen Mitsubishi Commands | Overview

 Here yo can find a list of command sections for Mitsubishi CNC controllers on Citizen and... [read more]		Support | Citizen Mitsubishi Commands | Overview

Support | Citizen Mitsubishi Commands | Axis independent parameter

 Axis name Basic Specification Para # 11 abson Absolute position set # 1 SET Absolute position set # 2 base Absolute position set SET_FIN Machine end E - G Axis specification para... [read more]		Support | Citizen Mitsubishi Commands | Axis independent parameter

Support | Citizen Mitsubishi Commands | Buffer correction

 Start buffer correction Buffer correction end Acquire buffer correction status Buffer correction point acquisition (O number) Acquire buffer correction point (block) Buffer... [read more]		Support | Citizen Mitsubishi Commands | Buffer correction

Support | Citizen Mitsubishi Commands | Data on alarm

 Absolute value alarm: attribute              : Sub 1              : Sub 2              :number Servo alarm: attribute              : Sub 1              : Sub 2... [read more]		Support | Citizen Mitsubishi Commands | Data on alarm

Support | Citizen Mitsubishi Commands | Data on arbitrary axis superposition

 Arbitrary superimposition control data 1 Arbitrary superimposition control data 2 Arbitrary superimposition control data 3 Arbitrary superimposition control data 4 Arbitrary... [read more]		Support | Citizen Mitsubishi Commands | Data on arbitrary axis superposition

Support | Citizen Mitsubishi Commands | Data on current NC program and running status

 O: Program number (main program) N: Sequence number (main program) B: Block number (main program) O: Program number (subprogram) N: Sequence number (subprogram) B: Block number... [read more]		Support | Citizen Mitsubishi Commands | Data on current NC program and running status

Support | Citizen Mitsubishi Commands | Data on date time etc

 Power on time Automatic operation time Auto start time External integration 1 hour External integration 2 hours date Times of Day Power-on time (unit: motion cycle) Automatic... [read more]		Support | Citizen Mitsubishi Commands | Data on date time etc

Support | Citizen Mitsubishi Commands | Data on forced output of device

 Modal output device 1 Modal output number 1 Modal output data 1 Modal output device 2 Modal output number 2 Modal output data 2 Modal output device 3 Modal output number 3 Modal... [read more]		Support | Citizen Mitsubishi Commands | Data on forced output of device

Support | Citizen Mitsubishi Commands | Data on I F of super option

 Data setting completion flag PC command NC status Point balance Used points Purchase point Subtraction point 1 Subtraction point 2 Warning point 1 Warning point 2 See:... [read more]		Support | Citizen Mitsubishi Commands | Data on I F of super option

Support | Citizen Mitsubishi Commands | Data on M S T B function

 M directive S command (1st spindle) S command (second main spindle) S directive (third spindle) S command (fourth main spindle) S command (fifth spindle) S directive (sixth... [read more]		Support | Citizen Mitsubishi Commands | Data on M S T B function

Support | Citizen Mitsubishi Commands | Data on Machine Para Open I F

 Machine para opening I / F 1 Machine para opening I / F 2 Machine para opening I / F 3 Machine para opening I / F 4 Machine para opening I / F 5 Machine para opening I / F 6... [read more]		Support | Citizen Mitsubishi Commands | Data on Machine Para Open I F

Support | Citizen Mitsubishi Commands | Data on machine specification

 Stored stroke limit (+) # 2014 OT + Stored stroke limit (-) # 2015 OT- Axis parameter # 8208 Soft limit + Axis parameter # 8204 Soft limit - Rotational axis # 1017 rot Diameter... [read more]		Support | Citizen Mitsubishi Commands | Data on machine specification

Support | Citizen Mitsubishi Commands | Data on memory read write

 Memory read / write 1 byte data Memory read / write 2 byte data Memory read / write 4 byte data See: IIoT... [read more]		Support | Citizen Mitsubishi Commands | Data on memory read write

Support | Citizen Mitsubishi Commands | Data on message notification

 Message notification information Message notification busy flag Message notification status Driver processing time Message reception function processing time See:... [read more]		Support | Citizen Mitsubishi Commands | Data on message notification

Support | Citizen Mitsubishi Commands | Data on PLC switch load meter display

 PLC switch name PLC switch input signal PLC switch input signal (collective) PLC switch output signal PLC switch output signal (collective) Road meter comment See:... [read more]		Support | Citizen Mitsubishi Commands | Data on PLC switch load meter display

Support | Citizen Mitsubishi Commands | Data on position switch

 Axis name 1 Dog position 1-1 Dog position 2-1 Axis name 2 Dog position 1-2 Dog position 2-2 Axis name 3 Dog position 1-3 Dog position 2-3 Axis name 4 Dog position 1-4 Dog... [read more]		Support | Citizen Mitsubishi Commands | Data on position switch

Support | Citizen Mitsubishi Commands | Data on power supply monitor servo axis main axis

 Power Supply Quantity Power supply name Unit type name Unit serial number S / W version Connected drive Recovered energy Power-supply voltage PN bus voltage MINPN bus voltage Bus... [read more]		Support | Citizen Mitsubishi Commands | Data on power supply monitor servo axis main axis

Support | Citizen Mitsubishi Commands | Data on program correction I F in program check

 Reverse Block Stop Request Buffer correctability information See: IIoT Device Driver for Citizen Mitsubishi... [read more]		Support | Citizen Mitsubishi Commands | Data on program correction I F in program check

Support | Citizen Mitsubishi Commands | Data on servo axis name position state etc

 Number of axes (reset state) Axis state Machine position (double type) Current position (double type) Work coordinate position (double type) Remaining command Origin · Zero... [read more]		Support | Citizen Mitsubishi Commands | Data on servo axis name position state etc

Support | Citizen Mitsubishi Commands | Data on servo monitor servo axis

 Number of axes Axis name gain Droop Rotational speed Feed speed Load current MAX current 1 MAX current 2 MAX current 3 Overload Regenerative load Estimated disturbance torque MAX... [read more]		Support | Citizen Mitsubishi Commands | Data on servo monitor servo axis

Support | Citizen Mitsubishi Commands | Data on servo monitor spindle type servo

 Number of axes Axis name gain Droop Rotational speed Feed speed Load current MAX current 1 MAX current 2 MAX current 3 Overload Regenerative load Estimated disturbance torque MAX... [read more]		Support | Citizen Mitsubishi Commands | Data on servo monitor spindle type servo

Support | Citizen Mitsubishi Commands | Data on tool life management Lifetime management method I II

 Tool life management ?: Time Tool life management ?: Number of times Tool life management ?: Status Tool life management ?: Tool No. Tool life management ?: Status Tool life... [read more]		Support | Citizen Mitsubishi Commands | Data on tool life management Lifetime management method I II

Support | Citizen Mitsubishi Commands | Data on tool offset

 Tool correction group number Tool correction amount: Edge wear amount: X Tool correction amount: cutting edge wear amount: Z Tool correction amount: Edge wear amount: Y Tool... [read more]		Support | Citizen Mitsubishi Commands | Data on tool offset

Support | Citizen Mitsubishi Commands | Data on tuning of NC specification

 Effective line Inch unit # 1041 I_inch Input unit # 1003 Edit lock B During automatic operation Automatic operation active Machining program tape storage length MACHINE Maker... [read more]		Support | Citizen Mitsubishi Commands | Data on tuning of NC specification

Support | Citizen Mitsubishi Commands | Data on variable

Local Variable Macro Subpro Number of sets of common variable (# 100 ~) Common variable (# 100 ~) Number of sets of common variable (# 500 ~) Common variable (# 500 ~) Custom... [read more]		Support | Citizen Mitsubishi Commands | Data on variable

Support | Citizen Mitsubishi Commands | Data on waveform display screen

 Sampling period Sampling type Sampling start trigger signal Sampling start trigger level Sampling data size Waveform display Horizontal scale Sampling data code Sampling data... [read more]		Support | Citizen Mitsubishi Commands | Data on waveform display screen

Support | Citizen Mitsubishi Commands | Data on work offset

 G 58 Work coordinate system offset G59 Work coordinate system offset G54 Work coordinate system offset (extension I / F) G55 Work coordinate system offset (extended I / F) G56... [read more]		Support | Citizen Mitsubishi Commands | Data on work offset

Support | Citizen Mitsubishi Commands | Data related to auxiliary axis J2CT control

 Number of auxiliary axes Axis valid / invalid information driving Operation adjustment mode Absolute position set Position set state Operation mode Operating parameters... [read more]		Support | Citizen Mitsubishi Commands | Data related to auxiliary axis J2CT control

Support | Citizen Mitsubishi Commands | Data relating to auxiliary axis J2CT monitor

 Droop Rotational speed Load current MAX current 1 MAX current 2 Load factor Regenerative load Current station number present location Target station number Command position... [read more]		Support | Citizen Mitsubishi Commands | Data relating to auxiliary axis J2CT monitor

Support | Citizen Mitsubishi Commands | Data relating to spindle monitor including spindle type servo

 Number of axes Axis name gain Droop Rotational speed Load MAX current 1 MAX current 2 MAX current 3 Overload Regenerative load Estimated disturbance torque MAX disturbance torque... [read more]		Support | Citizen Mitsubishi Commands | Data relating to spindle monitor including spindle type servo

Support | Citizen Mitsubishi Commands | Data relating to the operating state etc of the spindle

 First spindle rotation speed Second spindle rotation speed Third spindle rotation speed Fourth spindle rotation speed Fifth spindle rotation speed Sixth spindle rotation speed... [read more]		Support | Citizen Mitsubishi Commands | Data relating to the operating state etc of the spindle

Support | Citizen Mitsubishi Commands | Event I F

 DPRNT function start / end notice DPRNT execution state MelPostMessageEx start notification MelPostMessageEx start end notice MelPostMsgBufferEx start notification... [read more]		Support | Citizen Mitsubishi Commands | Event I F

Support | Citizen Mitsubishi Commands | Key history data

 History function control History data update check Read history data See: IIoT Device Driver for Citizen... [read more]		Support | Citizen Mitsubishi Commands | Key history data

Support | Citizen Mitsubishi Commands | M600L compatible I F for Citizens group

 Network option 06 Network option 07 Network option 08 Network option 09 Network option 11 Network option 11 Network option 12 Network option 13 Network options 14 Network option... [read more]		Support | Citizen Mitsubishi Commands | M600L compatible I F for Citizens group

Support | Citizen Mitsubishi Commands | MELDAS NET failure diagnosis information

 Presence / absence of fault diagnosis information See: IIoT Device Driver for Citizen Mitsubishi... [read more]		Support | Citizen Mitsubishi Commands | MELDAS NET failure diagnosis information

Support | Citizen Mitsubishi Commands | MELDAS diagnostic data

 Initialization of diagnostic information Check for existence of diagnostic information SRAM maximum size of diagnostic information DRAM maximum size of diagnostic information NC... [read more]		Support | Citizen Mitsubishi Commands | MELDAS diagnostic data

Support | Citizen Mitsubishi Commands | Memory Read Write

 See: IIoT Device Driver for Citizen Mitsubishi controllers... [read more]		Support | Citizen Mitsubishi Commands | Memory Read Write

Support | Citizen Mitsubishi Commands | Parameter

 G00 dry run Macro single Ignore middle point Machine lock high speed ABS / INC address G04 Time fixed Interference avoidance Command unit 10 times Decimal type 2 G00... [read more]		Support | Citizen Mitsubishi Commands | Parameter

Support | Citizen Mitsubishi Commands | PLC device

 Device B (one shot) link relay Device C (one shot) counter input Device C (one shot) counter output Device E (one shot) special relay Device SM (one shot) special relay Device F... [read more]		Support | Citizen Mitsubishi Commands | PLC device

Support | Citizen Mitsubishi Commands | Simulation I F

 Mode set Mode reset Forwarding information Interpolation type Coordinate system type Data precision type Data transfer request See:... [read more]		Support | Citizen Mitsubishi Commands | Simulation I F
Modified: 2024-03-26