| Command | Default Data Type | Description | Part | Axis | R/W | Data Range |
|---|
M_SSEC_CNTR_POS_WRK
| T_FLOATBIN/T_LONG | Workpiece coordinate position counter | O | O | R | |
M_SSEC_CNTR_POS_MCH
| T_FLOATBIN/T_LONG | Machine position counter | O | O | R | |
M_SSEC_CNTR_POS_CURRENT
| T_FLOATBIN/T_LONG | Current position counter | O | O | R | |
M_SSEC_CNTR_POS_RELATV
| T_FLOATBIN/T_LONG | Relative position counter | O | O | R | |
M_SSEC_CNTR_POS_PROGRAM
| T_FLOATBIN/T_LONG | Program position counter | O | O | R | |
M_SSEC_CNTR_DISTANCE
| T_FLOATBIN/T_LONG | Remaining command | O | O | R | |
M_SSEC_CNTR_SKIP
| T_FLOATBIN/T_LONG | Skip coordinate counter (Workpiece coordinate) | O | O | R | |
M_SSEC_CNTR_INTER
| T_FLOATBIN/T_LONG | Manual interruption amount 1 (ABS Off) | O | O | R | |
M_SSEC_CNTR_INTER2
| T_FLOATBIN/T_LONG | Manual interruption amount 2 (ABS On) | O | O | R | |
M_SSEC_CNTR_NEXT
| T_FLOATBIN/T_LONG | Next command | O | O | R | |
M_SSEC_CNTR_POS_RESTART
| T_FLOATBIN/T_LONG | Restart position counter (Workpiece coordinate) | O | O | R | |
M_SSEC_CNTR_POS_RE_DIST
| T_FLOATBIN/T_LONG | Remaining restart distance counter | O | O | R | |
M_SSEC_CNTR_POS_RE_MCH
| T_FLOATBIN/T_LONG | Restart position counter (Machine coordinate) | O | O | R | |
M_SSEC_CNTR_POS_PROG2
| T_FLOATBIN/T_LONG | Program position counter 2 | O | O | R | |
M_SSEC_CNTR_POS_TLM
| T_FLOATBIN/T_LONG | TLM position counter | O | O | R | |
M_SSEC_CNTR_TLM_SKIP
| T_FLOATBIN/T_LONG | TLM skip position counter (mxtlms) | O | O | R | |
M_SSEC_CNTR_TLM
| T_FLOATBIN/T_LONG | TLM position counter (mxtlm) | O | O | R | |
M_SSEC_CNTR_MXSKPM
| T_FLOATBIN/T_LONG | Skip coordinate counter (Machine coordinate) | O | O | R | |
M_SSEC_CNTR_MXSKPR
| T_FLOATBIN/T_LONG | Remaining skip distance counter | O | O | R | |
M_SSEC_CNTR_LM
| T_LONG | Interpolation combined vector length (lm) | O | -- | R | |
M_SSEC_CNTR_POS_CURRENT_B
| T_FLOATBIN/T_LONG | Current position B counter | O | O | R | |
M_SSEC_CNTR_SKIP_WORK
| T_FLOATBIN/T_LONG | Skip machine value (manual skip position) | O | O | R | - |
M_SSEC_CNTR_SKP_COORD_POS
| T_FLOATBIN | Skip coordinate position (skip coordinate counter) | O | O | R | Special |
M_SSEC_CNTR_MEAS_POS
| T_FLOATBIN | Measure position | O | O | R | Special |
M_SSEC_CNTR_POS_TIP_M
| T_FLOATBIN | Tip machine position | O | O | R | - |
M_SSEC_CNTR_POS_TIP_W
| T_FLOATBIN | Tip workpiece position | O | O | R | - |
M_SSEC_CNTR_POS_T_HDL
| T_FLOATBIN | Tool axis movement (ABS OFF) | O | O | R | - |
M_SSEC_CNTR_POS_MECHA1
| T_FLOATBIN | 1st mechanical axis angle | O | - | R | 0.000 to 720.000(Display with PLC unit) |
M_SSEC_CNTR_POS_MECHA2
| T_FLOATBIN | 2nd mechanical axis angle | O | - | R | 0.000 to 720.000(Display with PLC unit) |
M_SSEC_CNTR_GTR_POS_MCH
| T_FLOATBIN/T_LONG | Machine position counter (for trace) | O | O | R | |
M_SSEC_CNTR_GTR_POS_WRK
| T_FLOATBIN/T_LONG | Workpiece coordinate counter (for trace) | O | O | R | |
M_SSEC_CNTR_POS_MCH_DATA
| T_FLOATBIN/T_LONG | Machine position counter (inclined axis disabled) | O | O | R | |
M_SSEC_CNTR_POS_FB
| T_FLOATBIN/T_LONG | Feedback position | O | O | R | |
M_SSEC_CNTR_TABLE
| T_FLOATBIN/T_LONG | Table coordinate system counter | O | O | R | |
M_SSEC_CNTR_WORKPOS
| T_FLOATBIN/T_LONG | Workpiece install position coordinate system counter | O | O | R | |
M_SSEC_CNTR_SLOPE
| T_FLOATBIN/T_LONG | Inclined surface coordinate system counter | O | O | R | |
M_SSEC_CNTR_CNTR_ZERO
| T_FLOATBIN/T_LONG | Counter zero | O | O | W | ±99999.999 |
M_SSEC_CNTR_ORG_ZERO
| T_FLOATBIN/T_LONG | Origin zero | O | O | W | Disabled |
M_SSEC_CNTR_ORG_CANCEL
| T_FLOATBIN/T_LONG | Origin cancel | O | O | W | Disabled |
